Crysis Warhead (CCC) v3.00 is Here!

Crysis Warhead (CCC) v3.00 is here. Download here
Thanks Rot112 for the updates about it on the other thread and thank you Cuban and others who made this CCC possible.

What's your experience with it?
Mine:I used lvl 3 and got a smooth frame rate. Looks as good as high if not very high with same performance as med-high settings. Here is a video of LVL 3.

 

Im using level 4+ and so far I have a decent frame rate, though I haven't gotten into any levels with large amounts of explosions. I do have an issue right now though. I only just got the game and haven't played it without CCC, but as it stands right now, I'm on the second level trying to get to the downed pilot, and every gun that I use shoot turkeys. Yes, turkeys, like the little birds the walk around the island. I'll aim at a soldier, press the fire button, and a stream of turkeys fly out of my weapon, leaving the soldier uninjured. I'm too tired to try to fix this today, but hopefully I'll figure it out tomorrow.

 

Probably a crack... which you won't need with a legal copy installed, it already plays without the disk.

 

? that is the weirdest thing ever

 

LoL...yeah Danja you don't need to use the crack and i read your sig and think you should be running CCC lvl4 instead of 3 in CCC 2.21 for the first Crysis.

And WHY CANT YOU JUST BUY THE Maximum Edition!!!!!!!!

Yes for those who have a Gateway FX laptop (or anything equal to or above a 8800m) with an Upgraded CPU i reccomend you use CCC 3.0 LVL4+ which is pretty much the max.



Here is my CCC setup for those who have my laptop:

Crysis (original): Using CCC 2.21 LVL4: 30FPS average
Crysis Warhead: Using CCC 3.0 LVL4+: 35+FPS average

Have Fun!!!!!

 

for the laptop n my sig, what lvl should I run it at?

 

Whats CCC?

 

thats an easter egg or hack i believe

 

no TOD ?????!!!
however 28.48 fps ambush lvl4+ 1440 vs 26.7 before..

 

for the 8800m gtx which has been oced a little bit which level wud u suggest

 

LVL 5 should be fine for you. Your GPU is a lot stronger then rot112's GPU and he can do 4+.

 

4+ or 5 should be good for you. Unless you max the resolution then that could effect performance compared to my laptop.

 

I have a question. Thiss CCC mod, is it a just a mod to the config settings? or even more optimization other than settings?

 

Terminus you should use

Crysis (original) : CCC 2.21 LVL5 or 4 at nativer res
Crysis Warhead: CCC 3.0 LVL4+ at native res

OK lvl 4+ is the highest perf. config lvl in CCC 3.0. While in CCC 2.21 it was LVL5. So in other words CCC 4+ is CCC 2.21 LVL5.

As for Kal

Crysis (original): CCC 2.21 LVL4 at native res
Crysis Warhead: CCC 3.0 LVL4+



Terminus: CCC 2.21 for the first crysis is a optimization mod for the first crysis, and it also edited the TOD settings to make the colors and the ambience in the levels more realisitic.

While CCC 3.0 is on a optimization mod. The CUDATTS team cannot edit the TOD settings in the new Crysis {Warhead} because Crytek has locked the TOD files this time around. Though both mods are amazing and if you have both games like I, i would recommend you install CCC 2.21 and CCC 3.0 to Crysis and Crysis Warhead respectively.

*phew, i feel like customer support lol...JKING IF you guys have any more questions feel free to post more here.

 

ur support is much appreciated

 

So how was it Kal. Did CCC serve ya right. Did the game look good and run smoother.

 

well the installer is stuck atm :S ( around 50% ) gunna end task and re-try the installer

edit: ahh i know whats wrong , the installer is being difficult with the game being under steam apps

 

if you want i can paste the config file and you can try it with just that.

 

ive just done that , ill play as soon as i finish this episode of 24 lol

 

this is awesome warhead looks alot better , using 4+ settings, tho getting 20-27 fps , tho that is because im forced to play in dx10, the game crashes almost instantly after a checkpoint on dx9 for me

What i dont understand is why do consumers and enthusiast have to work so hard to get the game lookin this good, shudnt crytek have done this themselves in the first place considering they developed it?

 

Uhh. can someone please upload this to mediafire.com? My school blocks filefront because it is a "game" website.

 

Kal are you sure you have the patch 1 and 1.1 installed for Crysis warhead. Try that and get back to us. Because you should be staying above 30FPs with your Graphic card. Besides i don't think it is fair that i get better FPS than you when i have a slower GPU.

 

hey rot , ill try patchin , cos i was under the impression that steam games auto patch :S nvm , ill give it a shot thanks again

 

kk anytime...4+ is amazing and runs great.

 

I tried this same file in Crysis also and it worked.

 

don't do that. Use CCC 2.21 instead http://www.incrysis.com/forums/viewtopic.php?id=23117

this one is made for the first Crysis. While the one i posted the link for is only for Crysis Warhead.

 

Well I knew that even though I gave a shot but it worked and the graphics was superb.

 

uh spradhan01 does it run well with the config file. Or is it the same as CCC 2.21. Or worse?

 

LOL patching steam version of warhead is a baaad idea, i cant boot the game , it says it needs internet connection to authenticate the game... and im obviously online XD

 

My graphics look terrible even with Level 4+.....anyone knows why??

 

Because your graphics card sucks. That might be one reason.

 

yep...that might be it...times have changed my friend.

 

Hey Rot, you're a Crysis freak right? What's the best driver you've found for Crysis?

 

i downloade it just fine but when i install it it says something about an error,then stays at 50%.Then it wont respond.I am using xp pro any ideas?

 

LOL anothergeek. I don't play Crysis anymore. I play FFXI mainly and some Crysis Wars online.

The best driver i would say is 185.20 hands down for CryEngine 2 games.

 

the link doesn't work anymore, defaults to the filefront homepage. Another link, pwease?

 

the link is on www.incrysis.com/forums

look in the sticky for CCC in the warhead thread.

 

Well I wasnt talking about my laptop buddy. Its my desktop with 4GB RAM, 1GB ATI 4850 and a Q8200 Quad Core Processor.

 

Mine seems to be Stuck at 50% aswell . Can some1 please post there autoconfig file to level 4+ please .

 

Take that back then.

 

This is it CCC lvl 4+ Warhead :

------------------------------------------------

;[~]Cuban-Ultima-Doom-Arch-Assassin47-WasteoMind-Taowolf-Sword's Custom Crysis Configs [CCC] v3.00[~]

;File Release Version = 3.00 Warhead
;Config Version = LVL-4+ [" VERY HIGH-ENTHUSIAST +PP "] Config
;Shadows Version = Realistic Shadows Version
;Operating System = DX9 Windows XP/Vista 32/64
;File Name = Autoexec.cfg

;[~]SETS IN-GAME GRAPHICS SETTINGS TO LOW AUTOMATICALLY[~]

sys_spec_Full = 1
sys_spec_ObjectDetail = 1
sys_spec_Shading = 1
sys_spec_VolumetricEffects = 1
sys_spec_Shadows = 1
sys_spec_Texture = 1
sys_spec_Physics = 1
sys_spec_PostProcessing = 1
sys_spec_Particles = 1
sys_spec_Sound = 4
sys_spec_Shadows = 1
sys_spec_Water = 1
sys_spec_GameEffects = 1

;[~]CUSTOMIZE THESE SETTINGS TO YOUR OWN COMPUTER[~]

con_restricted = 0
r_width =
r_height =
r_VSync = 0
d3d9_TripleBuffering =
r_displayinfo = 0
sys_physics_CPU =

;[~]BASE PERFORMANCE BOOSTERS[~]

e_cbuffer = 1
cl_hitBlur = 0
cl_hitShake = 0
r_MultiGPU = 2
r_GeomInstancing = 1
e_particles_thread = 1
es_ondemandphysics = 1
gpu_particle_physics = 1
r_CullGeometryForLights = 1
e_vegetation_static_instancing = 0
e_terrain_occlusion_culling = 1
e_terrain_occlusion_culling_version = 0
e_terrain_occlusion_culling_max_dist = 200

;[~]CUSTOMIZE FOR YOUR CUSTOM SCREENSHOT SETTINGS[~]; ONLY WORK in the EDITOR (Sandbox 2)

e_screenshot_width =
e_screenshot_height =
e_screenshot_quality = 100
e_screenshot_file_format = jpg

;[~]CUSTOM HIGH DYNAMIC RANGE SETTINGS[~]

r_HDRRendering = 2
r_HDRLevel = 1.2
r_HDRBrightOffset = 35.3
r_HDRBrightThreshold = 7
r_Glow = 1
r_GlowScreenMultiplier = 0.4

;[~]CUSTOM AMBIENT OCCLUSION SETTINGS[~]

e_terrain_ao = 1
r_TerrainAO = 7
r_TerrainAO_FadeDist = 5.3

;[~]CUSTOM SCREEN-SPACE AMBIENT OCCLUSION SETTINGS[~]

r_SSAO = 1
r_SSAO_amount = 0.35
r_SSAO_blur = 4
r_SSAO_blurriness = 1
r_SSAO_darkening = 1
r_SSAO_quality = 1
r_SSAO_radius = 1

;[~]OBJECT-QUALITY SETTINGS[~]

e_obj_quality = 3
e_proc_vegetation = 1
ca_useDecals = 1
e_decals = 1
e_decals_allow_game_decals = 1
e_decals_life_time_scale = 0.5
e_lod_ratio = 6
e_lod_min = 0
e_view_dist_ratio_detail = 30
e_view_dist_ratio_vegetation = 40
e_vegetation_min_size = 1.0
i_rejecteffects = 1
e_vegetation_bending = 2
sys_flash_curve_tess_error = 6
e_view_dist_ratio = 60
e_max_view_dst_spec_lerp = 1
e_vegetation_sprites_distance_custom_ratio_min = 1
e_vegetation_sprites_distance_ratio = 1.45
e_detail_materials_view_dist_z = 256
es_DebrisLifetimeScale = 0.3
e_cbuffer_resolution = 128
e_dissolve = 1
ca_DrawFaceAttachments = 1
ca_AttachmentCullingRation = 120
ca_FacialAnimationRadius=3

;[~]GAME EFFECTS SETTINGS[~]

i_lighteffects = 0
g_ragdollMinTime = 5.0
g_ragdollUnseenTime = 1
g_ragdollDistance = 15.0
g_battleDust_enable = 0
ai_UpdateInterval = 0.26

;[~]PARTICLE SETTINGS[~]

e_particles_quality = 2
e_particles_lod = 1
e_particles_lights = 1
e_particles_receive_shadows = 0
r_UseSoftParticles = 1
e_water_ocean_soft_particles = 1
e_particles_object_collisions = 0
e_particles_max_screen_fill = 24

;[~]PHYSICS SETTINGS[~]

e_cull_veg_activation = 50
g_joint_breaking = 1
g_tree_cut_reuse_dist = 0.35
p_max_MC_iters = 4000
e_phys_foliage = 2
e_vegetation_wind = 1
es_MaxPhysDist = 60
es_MaxPhysDistInvisible = 10
e_phys_ocean_cell = 1
e_foliage_wind_activation_dist = 10
g_breakage_particles_limit = 70
v_vehicle_quality = 1
p_max_substeps_large_group = 5
p_num_bodies_large_group = 100
p_enable_triangle_cache = 1
p_sleep_speed_multiple = 64

;[~]POST PROCESSING EFFECTS SETTINGS[~]

r_PostProcessEffects = 1
r_MotionBlur = 4
r_Flares = 1
r_Coronas = 1
r_UseEdgeAA = 2
r_sunshafts = 1
r_colorgrading = 1
r_WaterGodRays = 1
r_DepthOfField = 1
g_Dof_Ironsight = 1

;[~]SHADER QUALITY SETTINGS[~]

q_ShaderGeneral = 2
q_ShaderMetal = 2
q_ShaderGlass = 2
q_ShaderVegetation = 2
q_ShaderIce = 2
q_ShaderTerrain = 2
q_ShaderShadow = 1
q_ShaderFX = 2
q_ShaderPostProcess = 2
q_ShaderHDR = 2
q_ShaderSky = 2
q_ShaderWater = 2
q_Renderer = 3
r_LightsSinglePass = 0

;[~]SPECIFIC SHADER SETTINGS[~]

e_sky_type = 1
e_sky_update_rate = 1
r_DetailTextures = 1
r_DetailNumLayers = 2
r_DetailDistance = 6
e_ram_maps = 1
sys_flash_edgeaa = 1
e_vegetation_use_terrain_color = 1
e_max_entity_lights = 7
r_UsePom = 1
r_EnvTexUpdateInterval = 0.075
r_TexturesFilteringQuality = 2
r_HairSortingQuality = 1
r_FillLights = 7

;[~]SHADOW SETTINGS[~]

e_shadows = 1
r_ShadowJittering = 1
e_shadows_max_texture_size = 1000
r_ShadowBlur = 0
e_gsm_lods_num = 5
e_gsm_range = 6
e_gsm_range_step = 1.96
e_shadows_cast_view_dist_ratio = 0.85
r_ShadowsMaskResolution = 0
e_shadows_on_alpha_blended = 0
e_shadows_from_terrain_in_all_lods = 0
e_gsm_cache = 1
r_ShadowGen = 1
r_shadowtexformat = 4
e_gsm_combined=0
e_gsm_view_space=0
e_shadows_occ_check=0
e_shadows_occ_cutCaster=0
e_shadows_slope_bias=0
r_UseShadowsPool=0
r_ShadowPass=1
r_ShadowsStencilPrePass=1

;[~]SOUND SETTINGS[~]

s_ReverbType = 1

;[~]TEXTURE SETTINGS[~]

sys_LowSpecPak = 0
r_TexResolution = 0
r_TexBumpResolution = 0
r_TexSkyResolution = 2
r_ImposterRatio = 1.7
r_EnvCMResolution = 1
r_EnvTexResolution = 2
r_DynTexMaxSize = 80
r_TexAtlasSize = 1024
r_DynTexAtlasCloudsMaxSize = 24
r_DynTexAtlasSpritesMaxSize = 16
r_VegetationSpritesTexRes = 64

;[~]VOLUMETRIC EFFECTS SETTINGS[~]

r_Beams = 3
r_BeamsDistFactor = 0.5
r_BeamsMaxSlices = 45
e_Clouds = 1
r_CloudsUpdateAlways = 0

;[~]OCEAN/WATER SETTINGS[~]

r_WaterUpdateChange = 0.1
r_WaterUpdateTimeMin = 0.1
r_WaterUpdateTimeMax = 1.0
r_WaterRefractions = 1
r_WaterReflections = 1
e_water_tesselation_amount = 5
e_water_tesselation_swath_width = 5
r_WaterCaustics = 1
r_WaterReflectionsQuality = 3
e_water_ocean_fft = 1
r_WaterReflectionsMinVisiblePixelsUpdate = 0.05

;[~]FOR HIGH-DETAIL ON MOUNTAINS[~]*KEY*=Important

e_terrain_normal_map = 0
e_terrain_lod_ratio = 1
e_terrain_texture_lod_ratio = 1
e_detail_materials_view_dist_xy = 4096
r_TexturesStreaming = 0



r_fullscreen = 1


------------------------End of Config----------------------