The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Gateway 7811 fx

    Discussion in 'Gateway and eMachines' started by crudisill11, Aug 9, 2009.

  1. crudisill11

    crudisill11 Notebook Enthusiast

    Reputations:
    4
    Messages:
    41
    Likes Received:
    0
    Trophy Points:
    15
    I just bought a used Gateway 7811 fx and was wondering if there is anything I can do to make the laptop run cooler?

    It has a fresh install of windows vista 64 bit.

    Would a BIOS update make it run any cooler?

    Thanks for your help.
     
  2. iaTa

    iaTa Do Not Feed

    Reputations:
    1,328
    Messages:
    2,675
    Likes Received:
    197
    Trophy Points:
    81
    Undervolt and buy a laptop cooler.
     
  3. AGlobalThreatsK

    AGlobalThreatsK Notebook Evangelist

    Reputations:
    63
    Messages:
    653
    Likes Received:
    0
    Trophy Points:
    30
    Make sure there is no dust blocking the vents. It accumulates quickly and needs to be blown out.

    Proper application of ICDiamond on the CPU, Northbridge, GPU and gpu memory will lower temps.

    A laptop cooler - Always a debate between the cryo lx and the zalman nc2000. Either way they are both most efficient when modified, since there is no perfect cooler for the 78** series right out of the box.

    People have also found that raising the laptop up in the rear or raising the entire laptop by lifting the feet has helped to lower temps also.
     
  4. Hello_Moto

    Hello_Moto Notebook Evangelist

    Reputations:
    39
    Messages:
    473
    Likes Received:
    0
    Trophy Points:
    30
    Modding the Zalman is far easier than the Cryo LX, FYI.

    Zalman - cardboard mod to redirect airflow to certain areas; tape + cardboard = easy.

    Cryo LX - replacement of stock fans + variable switch 12v adapter; screwdriver + 3x decent fans (antec tricool/scythe s-flex) + time to spare = difficult but fun!
     
  5. AGlobalThreatsK

    AGlobalThreatsK Notebook Evangelist

    Reputations:
    63
    Messages:
    653
    Likes Received:
    0
    Trophy Points:
    30
    I used sticker paper. Simply cut to size, peel, and place down on the cooler where you don't want the air to flow. This dedicates more air to the locations you choose (CPU, GPU).

    I also got a simple AC to USB adapter to power the cooler, and will obviously just use the usb power if using the laptop somewhere there is no ac power.
     
  6. iaTa

    iaTa Do Not Feed

    Reputations:
    1,328
    Messages:
    2,675
    Likes Received:
    197
    Trophy Points:
    81
    Just get a Cooler Master NotePal Infinite. Fits the laptop perfectly and cools the whole underside. The air intakes are also on the rear so you can use it in bed etc.