The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Help needed with BIOS update

    Discussion in 'Gateway and eMachines' started by LaptopOverclocker, Sep 29, 2007.

  1. LaptopOverclocker

    LaptopOverclocker Newbie

    Reputations:
    0
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    5
    Hi all,
    Wonder if anyone can help. I have a Gateway 8550GB which originally had a Pentium M 1.73Ghz processor and X700 Mobility card. I now have Pentium M 2.26 Ghz and X1900 mobility running in it which all works fine (3DMark 06 scoring around 3100 at standard clocks) apart from one thing. The temp reading for the CPU keeps hanging on 35oC when running at max load and then reading fine once off load so the fans do not spool up correctly to cool the unit. If I reinsert the X700 the problem goes away so I assume it may be a conflict to do with the X1900 card and the outdated Bios. The current version is Gateway 59.04 (from 2005) for the Intel 915PM board (think I may be correct in saying it is Pheonix Bios?). As usual Gateway Customer service are about as much help as a chocolate teapot. Does anyone know of a bios update? or any other ideas?
    Thanks

    Gaz
     
  2. qhn

    qhn Notebook User

    Reputations:
    1,654
    Messages:
    5,955
    Likes Received:
    1
    Trophy Points:
    205
    i m afraid that u r pretty much on ur own in this aspect. try using NHC or RMCLock to control the fan and performance? look for another brand that uses the same board footprint and see if they do have another bios version that would work

    cheers ...
     
  3. LaptopOverclocker

    LaptopOverclocker Newbie

    Reputations:
    0
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    5
    Ok thanks for the suggestion!

    Gaz