The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Help with Gateway MT6452 Notebook

    Discussion in 'Gateway and eMachines' started by heim, Apr 14, 2011.

  1. heim

    heim Newbie

    Reputations:
    0
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    5
    Hello all. I have an Gateway MT6452 the I had 2 replace the HDD in. I've done a fresh install of Vista but the notebook won't boot. I freezes @ the microsoft windows screen & it is very faint. Now if I put an flashdrive in the usb port during boot between the bios screen & when windows loads than it will fully boot. after boot if I put a flashdrive in the usb port I get the device not reconized error, However device manager says that all devices are installed & working properly. I have flashed the bios & still no regular boot. Has anyone seen this before? any help would be great & thanks in advance :mad:
     
    Last edited by a moderator: May 8, 2015
    heim, Apr 14, 2011
    #1