All p-states run fine with a voltage of 0.9125 both Prime95 (24 hours blend) and IntelBurnTest (50 runs max) confirm it. Anything lower produces errors after 9 hours.
Leave the B0 voltage alone because boost doesn't stay ON all the time, it jumps back and forth thereby preventing it from dramatically raising temps.
Prime95 24 hours max temp 64C
Prime95+Furmark 24 hours max temp 74C
Otherwise it shoots up over 90C with just Prime95 and would burn the hell out!
-
-
See above thanks!
-
See above thanks!
-
See above thanks!
-
See above thanks!
-
See above thanks!
-
See above thanks!
-
See above thanks!
-
Well, I offer you congratulations on your achievement. I am an FX user myself, but thanks for your posts as somebody else may have the same question that you have answered.
-
See above thanks!
-
See above thanks!
-
See above thanks!
-
See above thanks!
-
See above thanks!
-
See above thanks!
-
See above thanks!
Opening a Gateway NV55S
Discussion in 'Gateway and eMachines' started by dreamslides, Dec 21, 2011.