The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.
← Previous page

    Yippie.. First support for Extreme CPU's & P78xx

    Discussion in 'Gateway and eMachines' started by TANWare, Jun 5, 2010.

  1. Ultimate Destruction

    Ultimate Destruction Notebook Evangelist

    Reputations:
    67
    Messages:
    450
    Likes Received:
    0
    Trophy Points:
    30
    I'd like to overclock my P8400 to 2.4GHz, but first I need to turn off EIST, but it is not in the 9C.20 BIOS. Is it in 9C.17 or is there another way to do it?
     
  2. xxERIKxx

    xxERIKxx Notebook Deity

    Reputations:
    159
    Messages:
    1,488
    Likes Received:
    0
    Trophy Points:
    55
    I am not sure I never tried it with my T5550.
     
  3. Hello_Moto

    Hello_Moto Notebook Evangelist

    Reputations:
    39
    Messages:
    473
    Likes Received:
    0
    Trophy Points:
    30
    able to pull out a stable 3.9GHz on 1.45v for my X9100 (havent tried undervolting) . 7805u cant handle the heat too well though. I could probably manage 4GHz on 15x @ 1.5v but again, the 7805 stock heatsink will most likely not be able to cope with that.

    Idling around 75C and any CPU intensive task causes temps to sky-rocket to around 102C in the space of 7-10 seconds which consequently trips the auto-shutdown of my 7805u (i have yet to figure out how to bypass this, given that Intel states the X9100 failsafe is 120C).
     
  4. ignite

    ignite Notebook Consultant

    Reputations:
    0
    Messages:
    130
    Likes Received:
    0
    Trophy Points:
    30
    Hello Moto - Still the idea of running a cpu that high for daily use is just crazy. 75c is what most people see on load temps, not idle. Seems way way to high for your idle temps to me. Try and find a better vcore / max ghz that is stable because that is way to hot currently. Just because the max fail safe is 120 doesn't mean the chip should be ran at 110 most of it's life (or whats left of it). Chips that are ran at extremely high temps will not last as long. If you haven't done so apply a decent thermal compound and clean out all the dust from the fans. Those temps are way to high lol.
     
  5. Hello_Moto

    Hello_Moto Notebook Evangelist

    Reputations:
    39
    Messages:
    473
    Likes Received:
    0
    Trophy Points:
    30
    no i totally agree.

    i think it's my heatsink. Looking to replace it ASAP. the reason being that i'm thinking i've got some deeply ingrained ICD7 on it from previous applications that i cannot get rid of, despite my best efforts. Owing to this, it's more than likely having a deterimental effect on thermal conductive properties of the heatsink itself.

    either that, or my technique of applying ICD7 on the CPU and northbridge is wrong.
     
  6. xxERIKxx

    xxERIKxx Notebook Deity

    Reputations:
    159
    Messages:
    1,488
    Likes Received:
    0
    Trophy Points:
    55
    If your laptop turns off from overheating then it is not stable. You should get your cooling fixed before you overclock. are you sure your CPU fan is even working? 75c at idle is really high, as I type this my CPU is idling at core #0 29c/ core #1 32c.
     
  7. Hello_Moto

    Hello_Moto Notebook Evangelist

    Reputations:
    39
    Messages:
    473
    Likes Received:
    0
    Trophy Points:
    30
    yeah CPU fan is working; one of the first things i checked when i first started experiencing high idle temps. 7805u is sitting on top of overvolted Cryo LX and Evercool NB-MA1 too.

    gonna try ditching ICD7 and try AS5 + thermal pad on CPU and NB chipset respectively like how it was before.

    I'm defining "stable" as "no BSOD under stress". i can enjoy long gaming sessions/general multi-tasking with no ill effect. Only when testing with OCCT linpack/orthos/intel burn test pushes temps way too high and causes the auto-shutdown.
     
← Previous page