The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    ACPI compliant.

    Discussion in 'Hardware Components and Aftermarket Upgrades' started by thaiyub, Oct 11, 2007.

  1. thaiyub

    thaiyub Newbie

    Reputations:
    0
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    5
    If this is the first time youve seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

    The BIOS in this system is not fully ACPI compliant. Please contact your system vendor or visit http://www.hardware-update.com for an updated BIOS. If you are unable to obtain an updated BIOS or the latest BIOS supplied by your vendor is not ACPI compliant, you can turn off ACPI mode during text mode setup. To do this, simply press the F7 key when you are prompted to install storage drivers. The system will not notify you that the F7 key was pressed - it will silently disable the ACPI and allow you to continue your installation.

    Technical information:

    *** STOP: 0x000000A5 (0x00000011, 0x00000006, 0x00000000, 0x00000000)
     
    thaiyub, Oct 11, 2007
    #1
  2. thaiyub

    thaiyub Newbie

    Reputations:
    0
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    5
    If this is the first time youve seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

    The BIOS in this system is not fully ACPI compliant. Please contact your system vendor or visit http://www.hardware-update.com for an updated BIOS. If you are unable to obtain an updated BIOS or the latest BIOS supplied by your vendor is not ACPI compliant, you can turn off ACPI mode during text mode setup. To do this, simply press the F7 key when you are prompted to install storage drivers. The system will not notify you that the F7 key was pressed - it will silently disable the ACPI and allow you to continue your installation.

    Technical information:

    *** STOP: 0x000000A5 (0x00000011, 0x00000006, 0x00000000, 0x00000000)
     
    thaiyub, Oct 11, 2007
    #2