The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Aspire 6930z screen replaced but...

    Discussion in 'Hardware Components and Aftermarket Upgrades' started by deen0, Aug 7, 2012.

  1. deen0

    deen0 Newbie

    Reputations:
    0
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    5
    The screen has been replaced as the previous one was cracked. I bought one off ebay which was supposed to be compatible with my model the Aspire 6930z but now the brightness buttons do the opposite, so they have no been reversed.

    Also if i plug the charger in and switch on the backlight doesnt come on at all. I have to turn laptop on without the charger to get the backlight to turn on then i can plug in the charger. But the brightness is still reversed, im thinking the inverter and panel are not compatible.

    Any suggestions anyone?? All wires are in correct i have taken it out and put it back twice just to be sure but cant figure out whats up?
     
    deen0, Aug 7, 2012
    #1
  2. Acer6930z

    Acer6930z Newbie

    Reputations:
    0
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    5
    Hi,

    I have a different problem with my 6930z. I'm also over on an display change. I replaced the same type (resolution, backlight, connector etc.). The new display is working but not in the center position (under bios and windows also), it is slipped...
    Please check the picture.
    If you have anybody some idea please let me know
    [email protected]
    thanks,
    Tamas
     

    Attached Files:

    Acer6930z, Jan 23, 2013
    #2