Chicony MP989 mmc-2 cpu upgrade?

Hi the system is a p2 mmc-2 66fsb 350mhz, can this system support a p3 mmc-2 100fsb 750mhz cpu? here are the specs thanks

< System >
Manufacturer: Micron Electronics,Inc
Model: Transport NX
ID: 00000000-00000000-00000000-00000000

< Mainboard >
Manufacturer: Chicony Electronics Co,ltd
MP Support: No
Model: MP989
System BIOS: 07/24/1999-i440BX-NS338-2A69KC2AC-00
Chipset: Intel 440BX/DX/ZX

< Memory Controller >
Error Detection Method: Parity
Error Correction Capability: None
Supported/Current Memory Inter:1-way / 1-way
Number of Memory Slots: 4
Maximum Installable Memory: 512MB
Maximum Module Size: 128MB
Supported SDRAM Speeds: PC66, PC100
Supported Memory Types: EDO, SDRAM
Supported Memory Voltages: +3.3V

< Physical/BIOS Memory Banks >
DIMM1 (RASL-0 RASL-1): 64MB DIMM SDRAM single-bank
DIMM2 (RASL-2 RASL-3): 64MB DIMM SDRAM single-bank
DIMM3 (RASL-4 RASL-5): 64MB DIMM SDRAM single-bank
DIMM4: Empty

< Chipset 1 >
Model: Intel Corporation 82443BX/ZX 440BX/ZX CPU to
PCI Bridge (AGP Implemented)
Bus(es): ISA AGP PCI PCMCIA CardBus USB i2c/SMBus
Front Side Bus Speed: 1x 67MHz (67MHz data rate)
Maximum FSB Speed / Max Memory:1x 100MHz / 1x 100MHz
Width: 64-bit
IO Queue Depth: 4 request(s)

< Logical/Chipset 1 Memory Banks >
Bank 0: 64MB SDRAM 3-3-3-0
Bank 2: 64MB SDRAM 3-3-3-0
Bank 4: 64MB SDRAM 3-3-3-0
Speed: 1x 67MHz (67MHz data rate)
Multiplier: 1/1x
Width: 64-bit