The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Clevo D900 Series Battery Rebuild

    Discussion in 'Hardware Components and Aftermarket Upgrades' started by FlameHaze, Feb 25, 2017.

  1. FlameHaze

    FlameHaze Notebook Consultant

    Reputations:
    14
    Messages:
    123
    Likes Received:
    24
    Trophy Points:
    31
    I needed to fix my battery for the D900F, because this may have then the issue...

    [​IMG]

    So I went ahead and went into my huge supply of 18650's

    [​IMG]

    Just so happens these are out of a Tesla Model S Battery pack... They are all good so now my new issue is attaching my nickle strips, I broke the old ones with the Taps so i'm unsure how to fix this, I can easily attach new strips but I am figuring out the taps right now, also how I should seal the pack to keep it together without making it impossible to ever open again

    anyone have input, Hoping to have a working laptop very soon

    3 of the 12 18650's were dead but i dented 2 opening the battery so i only have 7 good cells from the old battery
     
    FlameHaze, Feb 25, 2017
    #1