The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    DV9000 with fan control problem for the GPU and CPU

    Discussion in 'Hardware Components and Aftermarket Upgrades' started by i02fesea, Nov 3, 2009.

  1. i02fesea

    i02fesea Notebook Enthusiast

    Reputations:
    0
    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    5
    Hi everyone,

    I have a DV9000 laptop and I have problem with the fan control and the Heat Sink. The tempeture of the GPU and CPU go very high (GPU 60 and CPU 48), but the fan runs very slow, like if the tempeture is ok and after that the computer stops. As well I want to replace the pads from the heat sink, so I would like to know which types of pads I should use for this computer and where the GPU is located, because there are three chips (the CPU in right side, one in the middle and another in the left side with the nvidia signature).

    Btw my computer is Intel Duo and the bios is version D.25.

    Thank you in advance for any help
     
  2. moral hazard

    moral hazard Notebook Nobel Laureate

    Reputations:
    2,779
    Messages:
    7,957
    Likes Received:
    87
    Trophy Points:
    216
    60 and 48 dont sound high to me.
     
  3. moelda

    moelda Notebook Geek

    Reputations:
    6
    Messages:
    88
    Likes Received:
    0
    Trophy Points:
    15
    It does sound normal to me too.
    I used to have a DV9000 too... until the GPU melted onto the mobo.
    What graphics card do you have, mate?

    PS:

    I would strongly recommed you to visit this site:

    http://nvidiadefect.com/