The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Dell Incompatibility

    Discussion in 'Hardware Components and Aftermarket Upgrades' started by Hullspd720, Aug 25, 2009.

  1. Hullspd720

    Hullspd720 Notebook Enthusiast

    Reputations:
    0
    Messages:
    13
    Likes Received:
    0
    Trophy Points:
    5
    After ardous work and research I concluded that my LCD on my Dell Inspiron 9300 was bad, the dreaded vertical black line. I have purchased two LCDs from outside suppliers. Both of the LCDs worked, but the backlights never came on. The model of the LCD was LG LP171WU1 TL A2. With a flash light I could see the image, but it was not backlit. I figured it was the inverter. Using my old inverter from my LP171WU1 A4 the new screen did not light. Using a new inverter with a second new screen the same result.

    Does Dell block you from using non Dell parts? This makes no sense to me that two seperate LCDs had bum bulbs. Really? :eek:

    I originally had the LP171WU1 A4. I am going to go crazy1!! :mad:
     
  2. John Ratsey

    John Ratsey Moderately inquisitive Super Moderator

    Reputations:
    7,197
    Messages:
    28,841
    Likes Received:
    2,165
    Trophy Points:
    581
    I thought that the inverter was a separate part to the LCD panel.

    John
     
  3. Hullspd720

    Hullspd720 Notebook Enthusiast

    Reputations:
    0
    Messages:
    13
    Likes Received:
    0
    Trophy Points:
    5
    Looks like the TL A2 is a no problem replacement for the A4. The problem was in that babatek.com was not near as helpful as the gang at Bliss computers - via 247laptoplcd.com . The bulb was out on both monitors. I am currently using the LP171WU1 TL A2 with the A4 inverter in place with no problem!