The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Display P/N code for Toshiba P200D-11L

    Discussion in 'Hardware Components and Aftermarket Upgrades' started by burady, Mar 15, 2009.

  1. burady

    burady Newbie

    Reputations:
    0
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    5
    I have to change my display laptop for Toshiba Satellite P200D-11L. What's the correct p/n or code for this, pls ?
     
    burady, Mar 15, 2009
    #1
  2. K-TRON

    K-TRON Hi, I'm Jimmy Diesel ^_^

    Reputations:
    4,412
    Messages:
    8,077
    Likes Received:
    2
    Trophy Points:
    205
    The part number and model number of your LCD are located on the back of the LCD. You will need to disassemble the lid of your laptop to get this information.

    Everest may be able to tell you, but if it reads the numbers wrong, you can end up buying the wrong screen.

    To dismantle the lid, you need to remove the screws which hold the lid together. Usually the screws are located under small rubber pieces.

    K-TRON
     
    K-TRON, Mar 15, 2009
    #2
  3. burady

    burady Newbie

    Reputations:
    0
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    5
    Thx a lot, I have LP171WP4 (TL)(B4) 17.0" WXGA+ Notebook Display LCD TFT.

    If I 'll buy the model 17" WXGA+ LP171WX2 (A4), what is it the major difference ? can not be replaced ?
     
    burady, Mar 15, 2009
    #3
  4. zfactor

    zfactor Mastershake

    Reputations:
    2,894
    Messages:
    11,134
    Likes Received:
    3
    Trophy Points:
    455
    either one should work fine they both use a standard lvds plug the only thing is you may have to re-use the inverter from the original screen as they normally would come with different style inverters and the plugs would not be compatible other wise both have the normal 4 mounting holes on both sides. the wx2 is mostly used in hp's from what my books say
     
    zfactor, Mar 15, 2009
    #4
  5. burady

    burady Newbie

    Reputations:
    0
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    5
    So, it works fine the modell WX2. The seller said this display equipped also a Toshiba Satellite laptop. May I need any other re-use stuff ?
     
    burady, Mar 18, 2009
    #5