I ran the SisSoftware Sandra on my 2 week old HP dv5t 1199 and I got this warning about my FSB, even though my laptop is still with the factory settings (I haven't overclocked my system and neither have I fiddled with any of the hardware/BIOS settings).
Is this something I should be worried about and if yes, how should I sort this out? The SiSandra report is as below...Any help on this would be greatly appreciated
SiSoftware Sandra
System
Manufacturer : Hewlett-Packard
Model : HP Pavilion dv5 Notebook PC
Family : 103C_5335KV
Version : F.11
Serial Number : CNF8470TQ6
ID : 38464E43-54303734-23003651-4E6A3D8B
SKU Number : FW711EA#UUZ
System Chassis
Manufacturer : Quanta
Type : Notebook
Can be locked : No
Version : N/A
Power Cord(s) : 1
Serial Number : None
Boot-up State : Safe
Power State : Safe
Thermal State : Safe
Security State : External Interface Locked-out
Mainboard
Platform Compliance : Intel Centrino Pro Mobile Technology
Manufacturer : Quanta
Multi-Processor (MP) Support : No
Model : 3603
Type : Mainboard
Version : 02.20
Serial Number : CNF8470TQ6
Asset Tag : Base Board Asset Tag
Location in Chassis : Base Board Chassis Location
System Mainboard Properties
Removable : No
Replaceable : Yes
Hot Swap : No
On-board Devices
Video Adapter : Video Adapter (Enabled)
System Memory Controller
Location : Mainboard
Error Correction Capability : None
Number of Memory Slots : 2
Maximum Installable Memory : 8GB
BANK 0 - DIMM0 : Quimoda 151515151515151515151515151515151515 02114215 Unknown SO-DIMM Synchronous DDR2 2GB/64 @ 800MHz
BANK 2 - DIMM2 : Quimoda 181818181818181818181818181818181818 02114218 Unknown SO-DIMM Synchronous DDR2 2GB/64 @ 800MHz
Chipset
Model : HP PM45 Mobile Controller Hub
Revision : B1
Bus : Intel AGTL+
Independent FSB Channels : 1
Front Side Bus Speed : 4x 266MHz (1.06GHz)
Maximum FSB Speed : 4x 200MHz (800MHz)
Width : 64-bit
I/O Queue Depth : 12 request(s)
Maximum Bus Bandwidth : 8.31GB/s
Features
TXT - Trust Execution Technology : Yes
ME - Management Engine : Yes
AMT - Active Management Technology : Yes
VT-d - Virtualisation Technology : Yes
EF - EastFork Technology : Yes
AP - Agent Presence : Yes
CB - Circuit Breaker : Yes
Auto Fan Speed Control : Yes
Chipset 1 Hub Interface
Type : DMI (Direct Media Interface)
Version : 1.00
Number of Ports : 4
In/Out Width : 4-bit / 4-bit
Multiplier : 3x
Speed : 1x 100MHz (100MHz)
Logical/Chipset Memory Banks
Bank 0 : 1GB SO-DIMM x6-6-6 1T
Bank 1 : 1GB SO-DIMM x6-6-6 1T
Bank 2 : 1GB SO-DIMM x6-6-6 1T
Bank 3 : 1GB SO-DIMM x6-6-6 1T
Maximum Installable Memory : 8GB
Supported Memory Types : DDR2 DDR3 SO-DIMM
Channels : 2
Memory Bus Speed : 2x 399MHz (798MHz)
Maximum Memory Speed : 2x 533MHz (1.07GHz)
Multiplier : 6/4x
Width : 64-bit
Memory Controller in Processor : No
Refresh Rate : 7.80µs
Power Save Mode : No
Fixed Hole Present : No
Maximum Memory Bus Bandwidth : 12.47GB/s
APIC 1
Version : 2.00
Multiplier : 1/2x
Maximum Interrupts : 24
IRQ Handler Engaged : Yes
Enhanced Support : Yes
Memory Module
Manufacturer : Quimoda
Model : 64T256020EDL25C2
Extended Information : B23
Serial Number : 02114215
Type : 2GB DDR2 SO-DIMM
Technology : 16x(128Mx8)
Speed : PC2-6400U DDR2-800
Standard Timings : 5.0-6-6-18 3-24-6-3
Version : 1.02
Memory DC Line : 1.80V
Set Timing @ 400MHz : 5.0-6-6-18 3-24-6-3
Set Timing @ 333MHz : 4.0-5-5-15 3-20-5-3
Memory Module
Manufacturer : Quimoda
Model : 64T256020EDL25C2
Extended Information : B23
Serial Number : 02114218
Type : 2GB DDR2 SO-DIMM
Technology : 16x(128Mx8)
Speed : PC2-6400U DDR2-800
Standard Timings : 5.0-6-6-18 3-24-6-3
Version : 1.02
Memory DC Line : 1.80V
Set Timing @ 400MHz : 5.0-6-6-18 3-24-6-3
Set Timing @ 333MHz : 4.0-5-5-15 3-20-5-3
Environment Monitor 1
Model : Intel Core CPU [P1, C2, T100]
Version : 23.06
Mainboard Specific Support : No
Temperature Sensor(s)
CPU Temperature : 42.00°C td
System Bus(es) on Hub 1
Version : 2.30
System Bus 0 : PCI
System Bus 1 : PCIe 1.00 x16 2.5Gbps
System Bus 2 : PCIe 1.00 x1 2.5Gbps
System Bus 3 : PCIe 1.00 x1 2.5Gbps
System Bus 4 : PCIe 1.00 x1 2.5Gbps
System Bus 5 : PCIe 1.00 x1 2.5Gbps
System Bus 6 : PCIe 1.00 x1 2.5Gbps
System Bus 7 : PCIe 1.00 x1 2.5Gbps
System Bus 10 : PCI66
LPC Hub Controller 1
Model : HP ICH9M LPC Interface Controller
Revision : A4
ACPI Power Management Enabled : Yes
Advanced TCO Mode Support : Yes
Advanced TCO Mode Enabled : No
High Precision Timer Enabled : Yes
Number of Precision Timers : 4
System Timer : 14.32MHz
Delayed Transaction Enabled : Yes
Disk Controller
Model : HP (ICH9) Mobile SATA AHCI Controller
Interface : SATA
Revision : A4
Specification : 1.10
Maximum SATA Mode : G2 / SATA300
Channels : 2
In Use Channels : 2
Port : G2 / SATA300
Port : G1 / SATA150
Audio Device
Model : HP (ICH9) HD Audio Controller
Revision : A4
Type : HD (High-Definition) Audio
Version : 1.00
Number of In / Out / Bi-Directional Streams : 4 / 4 / 0
Number of Serial Data Streams : 1
USB Controller 1
Model : HP (ICH9) USB Universal Host Controller
Revision : A4
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
USB Controller 2
Model : HP (ICH9) USB Universal Host Controller
Revision : A4
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
USB Controller 3
Model : HP (ICH9) USB2 Enhanced Host Controller
Revision : A4
Version : 2.00
Specification : 1.00
Interface : EHCI
Channels : 4
Companion Controllers : 2
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps) High (480Mbps)
Addressing Support : 64-bit
Legacy Emulation Enabled : No
USB Controller 4
Model : HP (ICH9) USB Universal Host Controller
Revision : A4
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
USB Controller 5
Model : HP (ICH9) USB Universal Host Controller
Revision : A4
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
USB Controller 6
Model : HP (ICH9) USB Universal Host Controller
Revision : A4
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
USB Controller 7
Model : HP (ICH9) USB Universal Host Controller
Revision : A4
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
USB Controller 8
Model : HP (ICH9) USB2 Enhanced Host Controller
Revision : A4
Version : 2.00
Specification : 1.00
Interface : EHCI
Channels : 8
Companion Controllers : 4
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps) High (480Mbps)
Addressing Support : 64-bit
Legacy Emulation Enabled : No
FireWire/1394 Controller 1
Model : HP IEEE 1394 Host Controller
Revision : A1
Version : 1.10
Interface : OHCI
Enhanced Support : No
Channels : 64
Speed : 400MHz
System SMBus Controller 1
Model : Intel 801xx/63xx SMBus
Version : 0.03
Specification : 2.00
Advanced TCO Mode Enabled : Yes
Slave Device Enabled : Yes
PEC Support : Yes
Speed : 100kHz
Expansion Slot(s)
PCI Express Graphic X16 : PCIe x16 PME Hot-Plug Available
PCI Express-0 : PCIe x1 PME Hot-Plug Available
PCI Express-1 (1h) : PCIe x1 PME Hot-Plug Available
PCI Express-2 (2h) : PCIe x1 PME Hot-Plug Available
PCI Express-3 (3h) : PCIe x1 PME Hot-Plug Available
PCI Express-4 (4h) : PCIe x1 PME Hot-Plug Available
Performance Tips
Notice 224 : SMBIOS/DMI information may be inaccurate.
Warning 2507 : Mainboard has too few memory slots. Upgrading the memory may be difficult or expensive.
Warning 2508 : All memory slots are full. Upgrading the memory may be difficult or expensive.
Warning 2541 : FSB exceeds Chipset rated speed. Reduce FSB.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.
-
Commander Wolf can i haz broadwell?
Sandra's just being stupid. You have a 45 chipset which is clearly rated to run 1066MHz FSB processors, even though Sandra seems to think otherwise:
If it isn't doing anything to downclock your FSB, there's probably not anything to worry about. -
Thanks for that quick reply... and no, it is not doing anything to reduce my FSB.
By the way, can you point me to a "smarter" software to check system performance and benchmarks?
Naveen -
CPU-Z, Everest Pro, PC Wizard....
And the FSB@266MHz is fine. Nothing to worry about. Instead of running software, checkout the documentation of the 4-series chipset on Intel's site. -
I just did that...
In any case, thanks for the quick help...
Cheers
"FSB exceeds chipset rated speed. Reduce FSB?"
Discussion in 'Hardware Components and Aftermarket Upgrades' started by canveen, Jan 29, 2009.