The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    HP Zbook 15 G3 upgrade gpu Mxm

    Discussion in 'Hardware Components and Aftermarket Upgrades' started by Argael, Nov 22, 2020.

  1. Argael

    Argael Newbie

    Reputations:
    0
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    5
    Good morning all,
    I went through the forum before writing this missive ;)
    I own an HP ZBOOK 15 G3 with a Quadro M2000 MXM 3.0A.
    I make many films in 4k and it lags...

    Is it possible to upgrade to Quadro T1000 or T2000 MXM 3.1A?
    Thanks to everyone who can help me
     
  2. Alyosha2001

    Alyosha2001 Newbie

    Reputations:
    0
    Messages:
    8
    Likes Received:
    1
    Trophy Points:
    6
    It's not possible, the CPU and GPU are solderel to the board. Sorry!
     
  3. jotm

    jotm Notebook Evangelist

    Reputations:
    347
    Messages:
    480
    Likes Received:
    87
    Trophy Points:
    41
    The CPU is soldered but the GPU is actually still a standard MXM card. It's rather surprising.

    Sadly, I can't comment on the upgradeability of it... HP laptops often have problems with newer cards, but the G1/G2 ZBooks can be upgraded from Kepler to Maxwell without problems, and even Pascal cards will work, but the fan will run at maximum all the time (different temperature sensor iirc).

    Afaik only the Quadro T1000 comes in MXM-A format (and also in MXM-B for the 17 inch ZBooks, so beware), so that's the only one you could try unless maybe you're willing to mod the laptop. They're still pretty new and since very few people buy these kinds of laptops, it would be pretty hard to find one, especially at a decent price.