The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Install standard SSD in Vaio SVS13A2X9

    Discussion in 'Hardware Components and Aftermarket Upgrades' started by djrm05, Jul 20, 2014.

  1. djrm05

    djrm05 Newbie

    Reputations:
    0
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    5
    HI all,

    I would like to upgrade the current SSD inside my Vaio SVS13A2X9 to a Samsung Evo 840 512Gb, however the current (256Gb) has a non starndard SATA connector.
    I have been searching here and seems that buying the ribbon cable with P/N: A1921021A (Sony V121 HDD FPC HIGH), a SSD with standard SATA connector can be set.

    I would appreciate if someone has replaced this part and can provide some clear information about the required cable.

    Thanks in advance!

    David
     
    djrm05, Jul 20, 2014
    #1