The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Is the original core duo T2500 @2.0GHz (32 bit) still considered a high performance CPU compared to todays stantards?

    Discussion in 'Hardware Components and Aftermarket Upgrades' started by eessie, Sep 1, 2008.

  1. eessie

    eessie Notebook Geek

    Reputations:
    61
    Messages:
    94
    Likes Received:
    0
    Trophy Points:
    15
    Hello guys,

    I was reading the Ultimate CPU guide on this site and I noticed there was not that much mentioned about the original 32 bit dual core processors and was wondering if the T2500 @2.0GHz (32 bit) is still considered a strong performer for applications and high end gaming considering the new processors that have come out since then? I am considering upgrading my T2500 to a Core 2 Duo T7400 and was wondering if that would help me in games such as Rainbow Six which demands a lot from the processor.

    Thanks
     
  2. mmoy

    mmoy Notebook Deity

    Reputations:
    144
    Messages:
    775
    Likes Received:
    6
    Trophy Points:
    31
    Core 2 Duo added about a 30 to 40 percent IPC boost. Since the original stepping, the G0 stepping improved power characteristics enabling overclocking to 4 Ghz. I think that current Penryns go higher than that.

    So there's better IPC, better power characteristics and higher clock frequencies possible. FSB speeds have improved too. Penryns have added about 5-10 percent IPC improvement and the SSE4 instruction set.
     
  3. K-TRON

    K-TRON Hi, I'm Jimmy Diesel ^_^

    Reputations:
    4,412
    Messages:
    8,077
    Likes Received:
    2
    Trophy Points:
    205
    Well, in short, the T7400 is going to be a pretty expensive upgrade, as the cpu costs around $300, and its only 160Mhz faster (per core)
    If your applications are 32 bit, there is really no point in upgrading to a T7400. The only way the T7400 will be better, is if the programs you are using require a 64 bit processor.

    The T2500 is still a good processor, and will be continued to be called a good processor for another 1-2 years. heck Pentium 4's are more than fast enough for most people. The only people who need more power, are video editors, gamers and basically multimedia/CAD.

    K-TRON
     
  4. naton

    naton Notebook Virtuoso

    Reputations:
    806
    Messages:
    2,044
    Likes Received:
    5
    Trophy Points:
    56
    Me too, I have the T2500 and all my multipliers between x6 and x10 are at 0.95v.

    That's good to know. Unfortunately, the high price of the T7400 and the T7600 won't justify the upgrade. Fast CPUs are always expensive even 2-3 years down the line. Heck, even pentium M 760, 770 and 780 are more expensie than a 2Ghz C2D!