-
H.A.L. 9000 Occam's Chainsaw
Those of you that have the HB112, I need dev/HW ID's from the Device Manager.
-
Yes, that's the same one I bought from eBay. Make sure you get a pcie mini converter if you have a full slot in your laptop.
-
Awesome, thanks guys. I'll probably pick it up then. Not sure about the whole pcie mini converter, I'm assuming that's to do with the actual part that connects to the laptop? I guess I can wait until I get both the laptop and the wifi card to see if I'll need this converter.
-
Ok, I will supply the numbers once it arrives. Are some of the numbers on the card itself?
-
Some wifi cards are half- mini and full mini. Half mini needs an adapter to fit a full mini.
-
H.A.L. 9000 Occam's Chainsaw
All I need is in Device Manager.
The true Killer 1103 alternative is the half-mini or HB112. Most laptops today don't have full-height card slots anyway... except business notebooks. -
Hmm, I just noticed it says the condition is "used." But there's been more than 40 sold so has there been completely new ones that he's sold or are they all just labelled used? Was yours "used" as well SPECTRE? To be honest, as long as it works, I'm not too fussed either way but wouldn't mind confirming.
-
Yes, it is used. I did however order mine from a guy in Florida instead of getting it from China. Eitherway it should be good.
-
H.A.L. 9000, i'm still using an Asus G51VX-A1, it has a full-mini pcie slot. So I had to get the little adapter for the half-mini. Can't wait to try this thing out. I heard that the reference atheros drivers are no slouch either.
-
My 9130 came a few days ago so I just bought the card from ebay. I can post device ID #s then and hopefully someone more technologically savvy than I may be able to mod the drivers? Will also post about generic Atheros drivers and performance there as well when the card comes.
-
Here they are!
PCI\VEN_168C&DEV_0030&SUBSYS_1627103C&REV_01
PCI\VEN_168C&DEV_0030&SUBSYS_1627103C
PCI\VEN_168C&DEV_0030&CC_028000
PCI\VEN_168C&DEV_0030&CC_0280
Mine came in a few days ago, I went ahead and installed it in my laptop and downloaded the Atheros drivers from HP's website. It is pretty fast in its base configuration, but I can't wait to see what the Killer Mod will do, since Killer drivers by-pass the windows network stack. If you want the Atheros drivers for this card, go to HP's website, go to the driver downloads page, and search for drivers for any of the G62 or G73 laptops that used this card. Then under networking adapaters category you will see a driver for your card. -
Thanks Spectre, but I've already downloaded the drivers from somewhere. I think there was another thread on this topic (which actually linked me to this thread) so I've got them. Just waiting on the card to come. Will probably be at least 2 weeks though.
-
but, do the "Atheros AR5BHB112 / AR9380" have the same wifi signal strength as the killer 1103?
-
As far as I can tell it does! My signal is consistant all around my house. I'm connecting to my router at 300mbps. I don't have a 450mbps router yet, but I will upgrade soon! As I can tell it is pretty fast with the stock drivers!
-
Sorry guys to bring this back up but can anyone drop a link with the modded driver or any instructions to get the inf from the killer driver package?
My card is the full height one XB112
Thanks!
Luis
EDIT: i managed to find the dell driver package for the killer cards they install on their laptops... it should be the same right? The good thing is that i was able to extract the exe and find the infs and setup. i should be ok right ? -
I got a question.. since the killer software has been acting up on people.. could you do this in reverse and use the oem software from the card manufacture? and if so is there any difference in performance?
-
Will this work?
Apple Atheros AR5BXB112 AR9380 Mini PCI E 450M Card for Dell Acer Asus Toshiba | eBay
My Aver has a full height slot. -
Same as mine
Just waiting for it to arrive!
-
Sweet I guess i'll pick on up for my "Aver" as well.
-
Anyone kind enough to share the moded driver? Anyway, i as able to get the inf from the Dell drivers and just forced install as a killer 1103. It works pretty flawlessly but i do not have any software layer to prioritize bandwidth. I also changed the device hardware ids to the match my AR5BXB112 but no noticeable effect, still no software layer after trying to install the manager from bigfoot.
Any help is much appreciated
-
You don't need to mod the inf to install, can just force it by using have disk option. You can get the newest driver/inf in temp folder when you install the one from killer site(just copy it to somewhere else). To get the software installed, you need to find out what it is checking which probably involve some(or alot) of coding knowledge.
-
uhm i noticed some1 said used dell drivers to force recognice atheros card, i have an alienware m11, u guys think it could work whit one ar9382?
which as u nkow is the 1102 the only prob far as i see is the software manager,
im bought one and im waiting, why not the 9380? cuz now its a lot of money xD and i have an intel 6250 but it is defective and frezes my lappy e.e so i nid to go to the dark side
so anyone found out and got working their cards at all and the managers? software manager specially? tyvm in advance ur answers. -
i only have two antennas. any one else using just two antennas?
-
H.A.L. 9000 Occam's Chainsaw
Reason I never posted up the end result was that the Atheros drivers were MUCH more stable and since it was just the inf, Windows manages it's own connections much better than the Killer software would. I HATE 3rd party software controlling my WiFi.
-
I figured as much based on earlier comments. I got the OEM (non killer version)card just because min is out dated and the OEM is decent quality. seems the only thing Killer has going for it is the reduced ping on the desktop variants.
-
where can i download the regular non killer driver?
-
Don't think they ever put driver in the site.
-
Exactly this is what yell every time i google for Atheros/Qualcom drivers. That company sux.
-
H.A.L. 9000 Occam's Chainsaw
It's not like they're hard to find...
ATHEROS Wireless drivers for Windows -
I saw that while googling. as far as I ca tell that is just a table with no DL links.
EDIT: these might work.
http://translate.google.com/transla...a=X&ei=zjLIUOSvJonE2gX-8YD4CA&ved=0CDAQ7gEwAA
this one says win 8 driver but, i think it might just be repackaged win 7 drivers.
http://drivers.softpedia.com/get/NE...80-WLAN-Driver-300119-for-Windows-8-x64.shtml
EDIT:EDIT: never mind, i guess not. the first link has no dl, just jumps back to the same page and the second is a cab file with a weird name. -
The .cz site do have download. I think that one is the best out there.
-
i don't see the link other than the big green DL buttons in the ads. other DL buttons just jump me back to the same page.
-
You need to let popup/script run probably.
-
i tried setting ad block to disabled every where. i'll give it another go.
EDIT: some how after clicking the same buttons over and over i got download going. -
I have noted on my 5920g the wifi on off button doesn't work any more. It just turns automatically.
-
Well, no issues with performance. Think i'm picking up a signal/connection from next door so i'm guessing the signal may have improved. Probably miles better than the stock 5920G wifi.
EDIT: the old was an Intel 3945AGB. -
Some newer Killer 1103 INF files from m18x r2 win7 x64 page (unmodded)
https://www.dropbox.com/sh/pzgw5mh38zpf0ze/xxvHxNZbbq
Killer Mod
Discussion in 'Hardware Components and Aftermarket Upgrades' started by moral hazard, Apr 13, 2012.