The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Need suggestion for 2.5 inch HDD Mount/Bracket for project.

    Discussion in 'Hardware Components and Aftermarket Upgrades' started by RainMotorsports, Feb 22, 2011.

  1. RainMotorsports

    RainMotorsports Formerly ClutchX2

    Reputations:
    565
    Messages:
    2,382
    Likes Received:
    2
    Trophy Points:
    56
    Alright so I am mounting a 2.5 inch hdd in a very cramped router. Its likely going to be hard to remove the drive from the bracket so it will probably be better to find a bracket that can be mounted.

    So I am taking any and all suggestions. If they werent 22 bucks i think id try an ASUS HDD Bracket. My HP ones wont work but maybe you guys know of something thats available on ebay for a different model.

    Remember its mounting in the lid of a router and shouldnt be more than 10mm wider/longer than the HDD (General estimate). G ot about 12 hours to find something cheap Go! and thanks :p
     
    RainMotorsports, Feb 22, 2011
    #1