The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Ram upgrade prob for a new toshiba A105-4211

    Discussion in 'Hardware Components and Aftermarket Upgrades' started by acitydweller, Aug 17, 2006.

  1. acitydweller

    acitydweller Newbie

    Reputations:
    0
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    5
    Hi all.

    Help! I cannot get the 1.5 gig ram configuration to work on my Toshiba A105-4211.

    The original 512mb ram is from Hynix. details: 512mb 2rx16 pc2-4200s-444-12

    The additional ram added is Kingston kvr533d2s4/1g...1gb pc2-4200 cl4 200 pin sodimm.

    The notebook boots with either 512 or 1 gig chips if solely installed. It does not boot when both chips are in either socket. Any advise here..?
     
    acitydweller, Aug 17, 2006
    #1