The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Repair Sony Vaio screen

    Discussion in 'Hardware Components and Aftermarket Upgrades' started by shakenfr, Mar 18, 2016.

  1. shakenfr

    shakenfr Newbie

    Reputations:
    0
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    5
    Hello,

    Here is my situation : I have a sony viao model SVS1311C5E with a screen problem (backlight doesn't work, I guess a vaio logo at boot but it's black). My vaio works with exernal screen.
    I open it to remove the defect screen and I ordered a new screen for this model, but when I receive my new screen, I connected it and the new screen is not recognized. The connector is the same, the model id of the screen is the same ( B133XW03 v.1) but It's not recognized. When I put the old one, there's a problem of blacklight but it's recognized. Have you an idea that explain the problem with the new screen. The only diffrence is the H/W ID. Old is H/W 5A and new is H/W 0D.
    Still no support with Sony in Europe :-(

    best
    bruno
     
    shakenfr, Mar 18, 2016
    #1