The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Replace QSI/241 drive with ND-6650

    Discussion in 'Hardware Components and Aftermarket Upgrades' started by ikecomp, Nov 11, 2005.

  1. ikecomp

    ikecomp Newbie

    Reputations:
    0
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    5
    I recently replaced my QSI/241 drive in my Gateway 400SD4 with the ND6650. Everything is running smooth except the faceplate for the NEC drive does not completely cover the old cd-rom drive bay. There is a small space to the left of the drive that is uncovered. Are there any bezel mods I can do to switch my new face plate with the old one or some way to cover that open space (don't want a lot of dust and particles to get in there)

    Thanks in advance
     
    ikecomp, Nov 11, 2005
    #1
  2. ikecomp

    ikecomp Newbie

    Reputations:
    0
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    5
    Never mind I found a site with some instructions on replacing the bezel. If anybody else is going to be replacing the bezel for the ND-6650, this is where you can find some useful info

    http://www.i9300.com/
     
    ikecomp, Nov 11, 2005
    #2