The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Samsung NVMe SSD Driver Download v2.1

    Discussion in 'Hardware Components and Aftermarket Upgrades' started by Spartan@HIDevolution, Jan 12, 2017.

  1. Spartan@HIDevolution

    Spartan@HIDevolution Company Representative

    Reputations:
    39,584
    Messages:
    23,560
    Likes Received:
    36,855
    Trophy Points:
    931
    Official Link = http://www.samsung.com/semiconductor/minisite/ssd/download/tools.html

    Mirror = http://www.mediafire.com/file/0aoy8czfbso5w67/Samsung_NVMe_Driver_2.1.exe

     
  2. fiziks

    fiziks Notebook Evangelist

    Reputations:
    94
    Messages:
    480
    Likes Received:
    59
    Trophy Points:
    41
    The 2.0 version and the earlier drivers also work with all Samsung NVMe drives and provide a performance boost over the generic MS NVMe driver.
     
    TomJGX likes this.
  3. Geronemo

    Geronemo Notebook Consultant

    Reputations:
    0
    Messages:
    132
    Likes Received:
    3
    Trophy Points:
    31
  4. fiziks

    fiziks Notebook Evangelist

    Reputations:
    94
    Messages:
    480
    Likes Received:
    59
    Trophy Points:
    41
    The SSD you referenced uses the SATA III bus and will be limited to SATA III speeds (max of 560MBps read for that drive). NVMe uses PCIe bus and is capable of much faster transfer rates. However, those transfer rates are still limited by the SSD itself. You can find inexpensive NVMe drives that don't do much better than SATA III drives in terms of transfer rates. m.2 is the slot for the SSD card (as opposed to mSata, for example). m.2 can support PCIe/NVMe, SATA III or both.
     
  5. Geronemo

    Geronemo Notebook Consultant

    Reputations:
    0
    Messages:
    132
    Likes Received:
    3
    Trophy Points:
    31
    So from what I am understanding if my motherboard supports PCIe m.2 it will also support NVMe drive right? max speed.

    My current Motherboard is limited to SATA 3 m.2. so NVMe drive won't so much good.

    Are all M.2 PCIe drives NVMe and support high speeds?

    Thanks.
     
  6. tilleroftheearth

    tilleroftheearth Wisdom listens quietly...

    Reputations:
    5,398
    Messages:
    12,692
    Likes Received:
    2,717
    Trophy Points:
    631
    See:
    http://forum.notebookreview.com/thr...-terminoligies-straight.800402/#post-10437023


    Imo, putting an M.2 SATA III drive in a notebook is the worst of all worlds. ;)

    Lower 1QD performance (thanks NVMe...), same thermal throttling issues (thanks again NVMe...) and in most/all notebooks - lower sustained, real world performance - thanks to almost no notebook chassis being designed to properly cool an M.2 drive...

    Bottom line? Don't worry about SATAIII vs. NVMe... in the end, you're still stuck with the connector/bays you have available (i.e. just use what you have...).