The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Scheme of power output Clevo P870 video card GTX Series 10XX

    Discussion in 'Hardware Components and Aftermarket Upgrades' started by giuliano zalfa, Apr 30, 2018.

  1. giuliano zalfa

    giuliano zalfa Newbie

    Reputations:
    0
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    5
    giuliano zalfa, Apr 30, 2018
    #1
  2. bennyg

    bennyg Notebook Virtuoso

    Reputations:
    1,567
    Messages:
    2,370
    Likes Received:
    2,375
    Trophy Points:
    181
    Schematics of the connector are in service manual for P870DM2/DM3, P870KM, and P870TM
    Those I know for certain, any other Clevo model that uses 10x0 MXM should also have it

    Also look for mr.Fox' 8700K/1080/P870DM thread this was something he had to wire to work the 1080 (1st gen with only 4 pin vga aux pwr)

    The pins themselves are just + and ground, nothing fancy.


    Interesting question, where does a 19V DC source come from on a desktop motherboard with MXM slot (e.g. MicroSTX?) - are the cards not picky for 12V or 19V since its being stepped down anyway, or is 12V boosted up to 19V in the circuitry powering the slot? @Khenglish @Meaker@Sager
     
    Last edited: Apr 30, 2018
    bennyg, Apr 30, 2018
    #2