The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Software/BIOS modifications after SSD,Memory and OS install

    Discussion in 'Hardware Components and Aftermarket Upgrades' started by aditya22784, Feb 15, 2015.

  1. aditya22784

    aditya22784 Notebook Enthusiast

    Reputations:
    0
    Messages:
    29
    Likes Received:
    0
    Trophy Points:
    5
    Hi,

    So I purchased a barebone Clevo P650SG and plan to install my own SSD, Memory and OS on it (doing all this for the first time, so very excited!!)

    This is probably a very Noob question but after installing the hardware and OS, do I need to go and change settings anywhere, like in the BIOS or in the OS itself?

    FYI- The SSD is 500GB Samsund 850 EVO and the RAM is 16GB Gskill 1866Mhz dual channel

    Cheers!
     
    aditya22784, Feb 15, 2015
    #1
  2. tijo

    tijo Sacred Blame

    Reputations:
    7,588
    Messages:
    10,023
    Likes Received:
    1,077
    Trophy Points:
    581
    No, you should not need to change BIOS settings afterwards. If there is anything you want to change BIOS wise, I'd actually suggest doing it before installing the OSé
     
    tijo, Feb 15, 2015
    #2