The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Toshiba Equium A200-196 BIOS Recovery

    Discussion in 'Hardware Components and Aftermarket Upgrades' started by Watersnapper, Aug 8, 2011.

  1. Watersnapper

    Watersnapper Guest

    Reputations:
    0
    Hi All,

    I have a Toshiba Equium A200-196 - PSAE2E-00D007AV which whilst in the middle of a BIOS updated decide to crash and power off the laptop.

    Now when i turn the laptop on i get the power light/battery light and i asume the CPU fun and nothing else. No output on the screen at all.

    I have read there could be a way of recovering the BIOS?

    i can confirm that pressing Fn+B before plugging the laptop in to the mains and switching it on, puts the laptop into the BIOS recovery Mode as the usually blue power light turns pink and it tries to read a floppy disc in the USB floppy drive i have attached to USB port 1 (bottom right hand corner of the Laptop)

    Is there anywhere i can get the original BIOS firmware that was shipped with the laptop to try?

    Has anyone ever successfully recovered a failed BIOS firmware upgrade for this model and how did they do it?

    Any suggestions would be great or anything i could try.

    I have tried the Phoenix recovery program but not sure if i'm doing it right as i don't get any beeping when the laptop is reading the floppy disc.
     
    Watersnapper, Aug 8, 2011
    #1