The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Turning back on inbuilt dual array microphones

    Discussion in 'Hardware Components and Aftermarket Upgrades' started by Eve White, Sep 14, 2008.

  1. Eve White

    Eve White Newbie

    Reputations:
    0
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    5
    I turned OFF the Sigma Tel High Definition dual microphone array (as want to use my laptop as a music recording device, adn the inbuilt microphone was picking up ambient sound in the room).

    I did this through Contril Panel/Audio Devices/Sound recognition Options/SOund recording/Microphone Array Properties

    Microphone Array Properties had two settings - Device Usage - Use this Device and Don't use this Device.

    I ticked Don't use this Device, and duly lost the extraneous noise as wanted to my recording input. However, how would I turn this microphone array back on to be able to amke internet calels etc? Under Sound Recordings, The Microphone Array properties is no longer visible so I cannot set it to "Use this device". How do I get it back?
     
    Eve White, Sep 14, 2008
    #1