The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Using SATA HDD with enclosure?

    Discussion in 'Hardware Components and Aftermarket Upgrades' started by DarthWayne, Jan 16, 2010.

  1. DarthWayne

    DarthWayne Notebook Consultant

    Reputations:
    28
    Messages:
    174
    Likes Received:
    2
    Trophy Points:
    31
    i took out the HDD of my older laptop.

    and used an AC powered USB To SATA connector to recover data...but its not an enclosure.

    is there an enclosure/casing in market by which i can use the laptop HDD like an IDE hdd...i.e carry it around and connect it via USB?

    its 160 GB and figured i could use it to carry movies
     
  2. ellalan

    ellalan Notebook Deity

    Reputations:
    336
    Messages:
    1,262
    Likes Received:
    82
    Trophy Points:
    66
  3. SoundOf1HandClapping

    SoundOf1HandClapping Was once a Forge

    Reputations:
    2,360
    Messages:
    5,594
    Likes Received:
    16
    Trophy Points:
    206
  4. Judicator

    Judicator Judged and found wanting.

    Reputations:
    1,098
    Messages:
    2,594
    Likes Received:
    19
    Trophy Points:
    56
    Er, you might need to be more specific. Does your HDD have a SATA interface, or an IDE interface? It sounds like it has a SATA interface, which means the enclosures Forge linked won't work, but your mention of IDE HDDs is confusing. It might be worth noting that IDE is an older interface these days, and most modern HDDs use a SATA interface (at least in notebook applications; desktop applications do tend towards a little more variety).