The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Westinghouse nb-14w2 dc port

    Discussion in 'Hardware Components and Aftermarket Upgrades' started by betterintheshade, Sep 14, 2009.

  1. betterintheshade

    betterintheshade Newbie

    Reputations:
    0
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    5
    I need to re-solder or possible replace the dc port on a Westinghouse laptop model nb-14w2 after it took a spill off the couch.

    I have removed all the screws on the back and figured out how to get the keyboard off but I can't get the skin off to expose the area where the dc port is.
    Can any one help me or does anyone have service manual info on how to get to the dc port connector?
     
    betterintheshade, Sep 14, 2009
    #1