I am planning to remove the DVD-drive from my VPCS11 Vaio and replace it with a HDD caddy.
Obviously the requirements are:
- It needs to fit
- !! It either needs to come with the model-specific faceplate or the available faceplate should be (nondestructively) attachable to the caddy !!
I found THIS as an option, but it would cost me about 50 euros incl. shipping costs to Europe and I might need to pay taxes on top of that too. I was hoping for a better deal...
I also found quite a few ebay offers that are quite inexpensive but I am not sure if they are any good and which one would fit and whether....
2ND Hard Drive HDD caddy Replace Sony VPCS118EC Matshita UJ892as DVD Drive | eBay
Any suggestions!? The drive currently installed is an Optiarc AD-7930H.
-
Tsunade_Hime such bacon. wow
I mean a caddy is caddy, as long as it is the right size (9.5mm vs 12 mm) and the ODD faceplate bezel lines up..
-
Well.... still - any specific suggestions?
What is it I need to pay attention to?
9.5mm vs 12 mm - is that everything or are there different forms? -
tilleroftheearth Wisdom listens quietly...
If I'm not mistaken, I think some caddies artificially limit you to 1.5GB/s speeds - so Z height is not the only thing to watch out for?
-
So more questions and no answers... -
tilleroftheearth Wisdom listens quietly...
Gracy123,
Sometimes, what you ask is more important than the answers you receive. -
-
tilleroftheearth Wisdom listens quietly...
Good luck!
-
Seriously - no specific suggestions!??
What HDD Caddy for my Vaio?
Discussion in 'Hardware Components and Aftermarket Upgrades' started by Gracy123, Nov 13, 2011.