The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    What is wrong with my CPU?

    Discussion in 'Hardware Components and Aftermarket Upgrades' started by denikin, Oct 12, 2009.

  1. denikin

    denikin Notebook Consultant

    Reputations:
    0
    Messages:
    129
    Likes Received:
    0
    Trophy Points:
    30
    [​IMG]

    I have a Sony SZ780E laptop. It came with a Penryn 2.4ghz T8300 CPU. What is interesting is that the CPU always works at 2.6ghz at full load, while the clock speed should be 2.4ghz. Its clock speed usually varies between 2.4ghz and 2.6ghz. Please see the above image. Is this OK? Also, Everest Ultimate says that my CPU is 8% overclocked, a job which I have never done. What is wrong? I have never upgraded nor changed the CPU since I bought at Sonystyle.
     
  2. Reaper05

    Reaper05 Notebook Evangelist

    Reputations:
    54
    Messages:
    515
    Likes Received:
    0
    Trophy Points:
    30
    i think all intel mobiles do it. it is very brief throttle think it is done to get a task done quickly. so nothing is wrong dont worry about it
     
  3. namaiki

    namaiki "basically rocks" Super Moderator

    Reputations:
    3,905
    Messages:
    6,116
    Likes Received:
    89
    Trophy Points:
    216
    Intel Enhanced Dynamic Acceleration Technology

    When you are using a single threaded app(one core being used), one core is overclocked while the other rests.
     
  4. Mastershroom

    Mastershroom wat

    Reputations:
    3,833
    Messages:
    8,209
    Likes Received:
    16
    Trophy Points:
    206
    That's Intel Dynamic Acceleration, or IDA. It temporarily disables one core and slightly overclocks the other, very briefly, when it's needed.

    EDIT - naimaki is a god damned ninja.
     
  5. Buckits

    Buckits Notebook Consultant

    Reputations:
    40
    Messages:
    206
    Likes Received:
    0
    Trophy Points:
    30
    I'm not sure what is happening but you'll be fine... a 200MHz overclock (or 8%) is not a big deal and won't affect the life of the CPU. You would need a bigger gain in clock speed and higher voltage to actually decrease/kill you cpu. I'm thinking somehow the cpu multiplier via bios or some software tweaking was changed from 12x to 13x (hence the extra 200MHz). I know you say you didn't do it, so it could just be a CPU-Z bug, nothing really.

    Edit: geez im slow
     
  6. denikin

    denikin Notebook Consultant

    Reputations:
    0
    Messages:
    129
    Likes Received:
    0
    Trophy Points:
    30
    Thanks guys!