The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Zero Overclock Possibility? RTM890N-632 PLL

    Discussion in 'Hardware Components and Aftermarket Upgrades' started by pp3089, Dec 15, 2010.

  1. pp3089

    pp3089 Newbie

    Reputations:
    0
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    5
    Hi,

    I would like to ask if overclock with setfsb is impossible to my notebook with clock generator RTM890N-632?

    As the datasheet of RTM890N-632 is currently not available, and I have emailed to Realtek for a request of datasheet but no response.

    I have tried all clock generator options available in setfsb, either PLL ID Error/halt or incorrect clock information was resulted.

    Is there any alternative methods to alter the fsb clock or to make setfsb work properly?

    Regards,
    pp3089
     
    pp3089, Dec 15, 2010
    #1