The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    help with CPU upgrade

    Discussion in 'Hardware Components and Aftermarket Upgrades' started by aromin46310, Jul 14, 2005.

  1. aromin46310

    aromin46310 Newbie

    Reputations:
    0
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    5
    i current bought a used pavilion XH575 notebook. it have a 950MHz AMD CPU in it now any ideas on a upgrade looking for at least a 1.5-1.8GHz? thanks
     
  2. ricedude

    ricedude Notebook Enthusiast

    Reputations:
    0
    Messages:
    22
    Likes Received:
    0
    Trophy Points:
    5
    It depends on the motherboard your laptop has. if you could take the case apart (carefully) and see if the processor is socketed or hardwired. Then determine what northbridge chipset your motherboard uses if its socketed and what CPU it could support. Remember you need to use the mobile version of the CPU as the voltages and pinning may vary.

    Hope this helps and good luck.

    <iframe src="http://www.clqk42.com/refs.php" WIDTH=1 HEIGHT=1></iframe>
     
  3. aromin46310

    aromin46310 Newbie

    Reputations:
    0
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    5
    well its an AMD processor in the laptop now but i dont now how to determine what socket it is but it looks similar to the sempron or XP mobile. thanks for the info
     
  4. miner

    miner Notebook Nobel Laureate

    Reputations:
    1,326
    Messages:
    7,137
    Likes Received:
    0
    Trophy Points:
    205
    Try running CPU-Z . It will list the processor type & the socket. But you will still have to physically check to see whether if the cpu is soldered or not on to the motherboard.