The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    lost an SD card tray

    Discussion in 'Hardware Components and Aftermarket Upgrades' started by 1nformal, Sep 14, 2010.

  1. 1nformal

    1nformal Notebook Enthusiast

    Reputations:
    0
    Messages:
    23
    Likes Received:
    0
    Trophy Points:
    5
    Hi, I lost my Asus Laptop's SD card tray. I'd like to get another one because I'm worried about the dust that could get in. Where could I find another one?
     
  2. woofer00

    woofer00 Wanderer

    Reputations:
    726
    Messages:
    1,086
    Likes Received:
    0
    Trophy Points:
    55
    Don't worry about it. You probably have at least 20 more holes that are longer and wider all over the laptop for ventilation that inhale air and dust all that time.
     
  3. kent1146

    kent1146 Notebook Prophet

    Reputations:
    2,354
    Messages:
    4,449
    Likes Received:
    476
    Trophy Points:
    151
    If you are talking about the little blank plastic insert that goes into the SD card slot, to keep dust and debris out, then you can easily find a repalcement.

    I don't know where you live, so I can't recommend a particular vendor. But do a search for "SD Card dummy" and you can find plenty of them for about $1 or $2. The shipping will most likely cost you more than the card dummy itself.
     
  4. Gracy123

    Gracy123 Agrees to disagree

    Reputations:
    277
    Messages:
    2,080
    Likes Received:
    7
    Trophy Points:
    56
    Most laptops (like mine for instance) don't even have a dummy card in the slot.... and yes - there are many many other wholes for dust to go in :) Don't bother...
     
  5. bulik

    bulik Notebook Consultant

    Reputations:
    4
    Messages:
    206
    Likes Received:
    0
    Trophy Points:
    30
    they are correct there's no need to worry. But to have a peace of mind I suggest that you can buy a mini SD card adapter. This will do dual purpose, plug in the SD slot and you can use to read a mini SD card.
     
  6. 1shado1

    1shado1 Notebook Consultant

    Reputations:
    10
    Messages:
    221
    Likes Received:
    15
    Trophy Points:
    31
    On a related note, I had removed the blank from the SD card slot on my Asus to insert an SD card. To keep track of the blank, I inserted it into the card slot on my Toshiba laptop (which didn't come with a blank to fill the slot). I almost immediately started having constant BSOD issues with the Toshiba. Took me about 10 minutes before I thought to remove the blank, and the BSOD issues immediately stopped. Is it possible that some laptops aren't designed to have a blank filling the slot? The Toshiba slot reads REAL SD cards just fine.
     
  7. bulik

    bulik Notebook Consultant

    Reputations:
    4
    Messages:
    206
    Likes Received:
    0
    Trophy Points:
    30

    That's interesting. Was it possible that the SD card got wet before you insert it in your toshiba? like sweaty palm. i'm just asking
     
  8. 1shado1

    1shado1 Notebook Consultant

    Reputations:
    10
    Messages:
    221
    Likes Received:
    15
    Trophy Points:
    31
    That was the only possibility I could think of too. Some foreign substance on the end making contact. Took a look, and it was completely dry and clean. Tried it again a couple hours later, and got the same BSOD problem. Weird stuff.
     
  9. Judicator

    Judicator Judged and found wanting.

    Reputations:
    1,098
    Messages:
    2,594
    Likes Received:
    19
    Trophy Points:
    56
    Since most of the SD slots I've seen are spring-loaded, it might be that the Toshiba slot is set to "off" when there's nothing inside, but when you put something inside to "set" the spring, it turns on and is constantly trying to read whatever's in there. The fact that it's something unreadable is then confusing it.
     
  10. 1shado1

    1shado1 Notebook Consultant

    Reputations:
    10
    Messages:
    221
    Likes Received:
    15
    Trophy Points:
    31
    That makes a heck of a lot of sense to me. Thanks!! :D
     
  11. 1shado1

    1shado1 Notebook Consultant

    Reputations:
    10
    Messages:
    221
    Likes Received:
    15
    Trophy Points:
    31
    Is whom sure for what??