I must have flashed bios on umpteen different desktop, notebooks , 20 to 30 and i have never had a bad flash, it still frightens the life out of me when i do flash, the chance of turning my lovely new notebook into a paperweight.
How can you have a bad flash nowadays , does the bios not check to see if it`s the right one for your notebook?
I have hear that flashing to a previous bios can kill it on some notebooks, how is this possible.
Are the manufactures making money out of this, why is bios recovery not a lot easier, and some of the new bios on some notebooks cannot be recovered at the moment.
So who`s fault is it the user or the manufacturer.
-
Tinderbox (UK) BAKED BEAN KING
-
Both, I would say. The manufacturer can certainl y do more to ensure that the proper BIOS files are being used but I also thinks that a lot of user probably did not get the correct BIOS for the system to start with. I have flashed many BIOS on both desktops and laptops and I have never had any problem.
-
I have bad luck with such stuff, if it can go wrong it generally will, which is why I've never flashed my BIOS unless it's to fix a fault. Saying that, I flashed my Touch HD and it went OK, same with CFW on the PSP.
To your question, I would have to agree with Wiz33. The manufacturer has to be 99% sure it will be compatibly with the system it was designed for but ultimately its up to the user to decide whether its worth the risk (however small it is). -
Flashing the BIOS will fail when the BIOS provided is not the right one, or not properly packed. 3 out of 3 BIOS flashes on my D900K failed. One with cd, one with usb memory drive, and one with floppy.
After that fiasco, I vouch to never trust Gophn again when it comes to flashing Bios chips.
K-TRON
lots of bricked bios, who`s fault is it?
Discussion in 'Hardware Components and Aftermarket Upgrades' started by Tinderbox (UK), Oct 27, 2009.