The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Compaq Armada screen replacement

    Discussion in 'HP' started by musicman, Apr 7, 2007.

  1. musicman

    musicman Newbie

    Reputations:
    0
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    5
    have an Armada V300 with a 13" screen. I've obtained a second hand 14" screen/lid same model. Although I've fitted the new screen and lid, the display is garbled although desktop is fine (W2000). The connectors on the old screen were 4, those on the replacement were 3. As the screen is working of a sort, is there any modification possible to get it working properly?
    Old screen is limited to 800 resolution, the new screen gives me 1024, although I have tried various resolution and screen colour settings in various combinations. Also checked I have latest driver from HP/Compaq site.
    Any help would be appreciated.
     
    musicman, Apr 7, 2007
    #1