The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    DV2000T screen problem - overexposed, pixelated

    Discussion in 'HP' started by hp_dv2000_t, Jul 9, 2009.

  1. hp_dv2000_t

    hp_dv2000_t Notebook Geek

    Reputations:
    0
    Messages:
    91
    Likes Received:
    0
    Trophy Points:
    15
    Greetings!

    I ran into a screen problem on my 2.5 years old HP DV2000t laptop. At first, upon powering up one day, the screen went very dim, barely visible. Upon restarting the computer a couple of times, the light came back on (somehow) but the colors are now very odd: overexposed and washed out and with pixels visible throughout, like on older TV screens. The problem seems related to hardware, as tapping the screen changes the lighting slightly, either a tad darker or lighter. When the screen was dim, I was inclined to think that a backlight lamp needed to be replaced, but not now with the light back on. Can the problem be due to the malfunctioning inverter board? Other possibilities and solutions? I'd be very grateful for any feedback. Thank you!
     
  2. flipfire

    flipfire Moderately Boss

    Reputations:
    6,156
    Messages:
    11,214
    Likes Received:
    68
    Trophy Points:
    466
    Please do not cross post into other forums.

    Sounds like your LCD panel is dying. Try slowly opening and closing the hinge to see if the colors change back to normal, if it does then it could be the LCD ribbon/cable.
     
  3. hp_dv2000_t

    hp_dv2000_t Notebook Geek

    Reputations:
    0
    Messages:
    91
    Likes Received:
    0
    Trophy Points:
    15
    Thank you for the response. Opening/closing the hinge does not help. Bending the screen (which normally is, of course, not wise) in a certain way almost brings back the normal exposure and pixel ratio but still not quite the same. Any further suggestions? Thank you
     
  4. Th3_uN1Qu3

    Th3_uN1Qu3 Notebook Deity

    Reputations:
    214
    Messages:
    1,192
    Likes Received:
    0
    Trophy Points:
    55
    The liquid crystals in your screen have gone out. It has nothing to do with the backlight.