The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    G1 Zbook 15 Turned off hybrid video and lost display to the screen with or without MXM

    Discussion in 'HP' started by ChanceJackson, Apr 21, 2017.

  1. ChanceJackson

    ChanceJackson Notebook Evangelist

    Reputations:
    39
    Messages:
    562
    Likes Received:
    231
    Trophy Points:
    56
    the outputs aren't working either and the DP capable ports weren't working when I had the 1070 installed either how can I perform a factory reset using buttons or jumpers?

    When I get back home I will try the garbage kepler quadro MXM in my sig and even if it doesn't work I have an identical system that I could use to blind navigate the bios on the system in this thread, but a factory reset would be easiest.
     
    hmscott likes this.
  2. ChanceJackson

    ChanceJackson Notebook Evangelist

    Reputations:
    39
    Messages:
    562
    Likes Received:
    231
    Trophy Points:
    56
    I was able to get around this by using the ports on the docking station but for some odd reason changing that setting causes the laptop to register as a different model in Microsoft device id Schema
     
    hmscott likes this.
  3. ChanceJackson

    ChanceJackson Notebook Evangelist

    Reputations:
    39
    Messages:
    562
    Likes Received:
    231
    Trophy Points:
    56
    I don't recommend disabling hybrid gpu, with a zotac 1070n card on g1 zbook 15... gpu never comes back on after the "driver install" flicker and the the system beeps until reboot
     
    Last edited: Apr 23, 2017
    hmscott likes this.