Hello
I have a problem with the Lap Top, HDX18-1070
Work on the first day on the Laptop, between 1 hour to 3 hours and then suddenly stop working!
After that, I close the Laptop, and re-operation of the new work between 5 minutes to 15 minutes
Several experiments have tried did not work for me either by the heat there is no final heat
CPU temperature of 36C to 46C
GPU temperature of 45C to 53C
I hope that you find a solution
-
Are you on Battery?
Make sure if you're not you check your plug .
Also, check your sleep/shutdown/powersaver settings.Last edited by a moderator: May 8, 2015 -
I remove the battery and you have the same problem and to work without a battery
Imbalance is not Windows, I've re-downloaded again Windows also suddenly stop
I extract the battery and the RAM is no good
Why wonder, knowing Lap Top works in both efficiencyLast edited by a moderator: May 8, 2015 -
I would try to help you, but your English is very difficult to comprehend. =/
-
I remove the battery and the same problem
System depends on the work suddenly
The problem is not Windows
To stop operating, even at the beginning of
Work 1 to 3 hours at the start
And then suddenly stop to work and I re-operation
Work between 5 minutes to 15 minutes -
How do you know? Have you installed Linux and have the same issue? How much room is left on your hard drive? Did you defrag your hard drive?
What symptoms do you have when it stops working? Does it freeze? Does it turn itself off?
Also, what work? CPU intensive, graphics intensive?
What do you mean by re-operation? You turn the computer on? Did you recently update the BIOS, or any drivers?
Are the vents clean? Do you use a cooling pad? The temperatures you posted don't look bad, but if I understand your situation correctly, you could have an over heating problem.
I hope this helps. Answering the above questions will help us help you. -
i used windows 7 K but the problem not from windows because im re-installed him again and he stooped of the work when when the setup worked
no any message its only freeze and my work its disnger
i have been update the bios to the last ver f.24 but the prblem its steal and i used the cooling pad but the cpu its between 36 to 46 and the gpu between 45 to 53 and when i turn on the laptop its not worked from first time unless if i turn off and the light for NUM LOCK/CAPS LOCK its turn off and on from him self . -
The flashing caps lock light indicates a CPU failure. I think you should call HP and get the motherboard replaced.
-
labtop, but works!!!
Only the first operation of this happening, and it remained closed and then reopened, but work less hours or freeze -
I understand that it is not a total failure but there's definitely something wrong with the CPU or motherboard. You should call support.
-
Can you blame anyone for not wanting to call HP? lol
I agree though, sounds like an overheating issue to me.
Not only the CPU but Sometimes HDD's overheat and cause shutdowns and lockups..Last edited by a moderator: May 8, 2015 -
How many blinks do you get?
<html>
<a class='udrline' name="LEDsBlinkOrComputerBeeps">[/URL]
Symptom: LEDs blink or computer beeps
During startup, if the diagnostic utilities detect a specific problem with
hardware components, various LED lights on the keyboard blink a series
of codes to help identify the cause of the problem. On older models, a
series of beeps may sound instead of LEDs blinking. The blink codes
only appear for a short time after pressing the power button. When a
series of blink or beep codes does occur, the computer will pause and
then repeat the series of codes. Count the number of blinks or beeps to
help identify the error condition using the table below. If you miss
the series of blink or beep codes, restart the computer and wait for a
series of blink codes or beep codes to occur.</html> <tbody valign='top'>LED / Beep Component Error Condition Blinking battery power LED Battery The AC adapter is attached and the battery is charging, but does not yet have sufficient charge to power the notebook. Blink: 1 - Caps Lock/Num Lock CPU CPU not functional Blink: 2 - Caps Lock/Num Lock BIOS BIOS corruption failure Blink: 3 - Caps Lock/Num Lock Memory Module error not functional Blink: 4 - Caps Lock/Num Lock Graphics Graphics controller not functional Blink: 5 - Caps Lock/Num Lock System board General system board failure Blink: 6 - Caps Lock/Num Lock BIOS BIOS authentication failure Blinking power adapter LED Power adapter Insufficient power Last edited by a moderator: May 12, 2015 -
joziefmx,
Has this issue been resolved? If so, how? -
I thank everyone for their interest in the topic
Now the problem has been solved, but that changed after a mother and left!!!
So that the guarantor did not know the problem and contacted me and said need to change the mother board
Is it the manufacturers fault, or these are HP machines come on!! -
Do you have the link for other blinking lights as well for an HDX18?
Please and Thank You!
Be well, JWLast edited by a moderator: May 12, 2015 -
I found this in HP web support...
http://h10025.www1.hp.com/ewfrf/wc/...ry&lc=en&dlc=en&cc=us&lang=en&product=3884584
HDX18 suddenly stop working!
Discussion in 'HP' started by joziefmx, Aug 4, 2009.