The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    HP/Compaq notebook nx9005 memory upgrade

    Discussion in 'HP' started by knightsfield, Feb 27, 2007.

  1. knightsfield

    knightsfield Notebook Enthusiast

    Reputations:
    0
    Messages:
    13
    Likes Received:
    0
    Trophy Points:
    5
    A friend is trying to upgrade his HP NX9005 from the standard 256M to 1G. He order 2 x 512MB DDR SODIMM PC2700 333MHz 200pin Memory Modules.

    The ones he ordered are http://www.ebuyer.com/UK/product/82242

    But his laptop just wont boot with them installed. The blue power light comes on then straight off then on again. It does the same if no memory is installed.

    He has tried each module one at a time and in both slots with the same results.

    Thinking it might be duff modules I've tried them in a IBM thinkpad and they work fine.

    Is the NX9005 fussy as to the type/manufacture of the memory it works with?

    Does anyone have anyothers ideas as to why they don't work.

    Thanks

    Rob
     
  2. nazım dugan

    nazım dugan Newbie

    Reputations:
    0
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    5
    Hi,

    How did you resolved the memory upgrade problem concerning HP Compaq nx 9005. I encountered the same problem as you. Do you have any suggestions.
    Thank you in advance.

    Nazim
     
  3. manasevi

    manasevi Newbie

    Reputations:
    0
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    5
    I own a Compaq nx 9005 and I tried to upgrade it with 2
    Kingston KVR266X64SC25/512 to 1 GB and I just have the same problem, it
    just wont boot with them installed?

    Does anyone knows how to solve this problem

    Thanks

    Raul