The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Hp Envy 14 changing the CPU

    Discussion in 'HP' started by badb0y, Sep 18, 2010.

  1. badb0y

    badb0y Notebook Enthusiast

    Reputations:
    30
    Messages:
    28
    Likes Received:
    0
    Trophy Points:
    5
    Hi guys, I want to change the CPU from the i3 370m to an i5 540m does anyone have a disassembly guide i can follow? As for those who already changed the CPU was it hard? Thanks in advance.
     
    badb0y, Sep 18, 2010
    #1
  2. Lmui

    Lmui Notebook Enthusiast

    Reputations:
    3
    Messages:
    37
    Likes Received:
    0
    Trophy Points:
    15
    You could try reading the first post in the owner's lounge.

    Also, my advice.

    A. Don't take it off without having your own thermal paste. You might not be one of these people but I know they're out there. Never re-use the thermal paste on the CPU.

    B. As long as you're careful to not forcefully pull everything out you should be fine. Make sure everything's inserted and every screw you took out is put back in.

    C. To pop up the keyboard you have the push the button under the battery cover and I'd recommend you have a small screwdriver or something to push up the middle and far edges of the keyboard since it's actually in very tightly.

    Other than that good luck.
     
    Lmui, Sep 18, 2010
    #2
  3. aBs0lut3z33r0

    aBs0lut3z33r0 Notebook Consultant

    Reputations:
    19
    Messages:
    270
    Likes Received:
    4
    Trophy Points:
    31
    look in the service manual , link on the owners lounge
     
    aBs0lut3z33r0, Sep 19, 2010
    #3