The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Problems to calibrate HP TX1000

    Discussion in 'HP' started by ivanka, May 20, 2008.

  1. ivanka

    ivanka Newbie

    Reputations:
    0
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    5
    Hi to all,

    today I got my HP TX1000 and I have problems to alibrate the touch screen. I open Control Panel > Hardware and sound > Tablet PC Settings > Calibrate the screen > Under Calibration I try to calibrate each corner where crosshair appears for all four cases. First of all, when i tap the crosshair, make a right click and try to press "Continue", nothing happens. I press ESC to turn back to the calibration options and to select the second orientation and so on... When I do the same with all four of them the Apply button is still disabled. I press OK to accept the changes, but it after that the touch screen doesn't work correct. It appears only on the left side on the screen and it is not possible to use it to tap with a pen other folders or icons on the screen.

    Did you have such opinion with this or could you give me some advice how to solve the problem.

    Thanks and regards,
    Ivanka
     
    ivanka, May 20, 2008
    #1
  2. miner

    miner Notebook Nobel Laureate

    Reputations:
    1,326
    Messages:
    7,137
    Likes Received:
    0
    Trophy Points:
    205
    miner, May 20, 2008
    #2