The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Screen problem with tx2z

    Discussion in 'HP' started by lorax1284, Nov 21, 2010.

  1. lorax1284

    lorax1284 Notebook Guru

    Reputations:
    1
    Messages:
    52
    Likes Received:
    0
    Trophy Points:
    15
    I have an problem with my tx2z: when it boots up from cold, the screen looks as it does in the pictures. After it's been on for a while, and reboot it, the display is fine.

    Even when the display has the problem, connecting via VNC is fine.

    I took off the keyboard and switch cover according to the maintenance manual, and tried to re-seat the screen cable connection, which had no positive effect.

    Is there a known cause for this? My machine's out of warranty, and I am not afraid to attempt a fix on my own.
     

    Attached Files:

    lorax1284, Nov 21, 2010
    #1