The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    T7500 stuck at 1.6Ghz? even with full load

    Discussion in 'HP' started by n19htmare, Sep 30, 2007.

  1. n19htmare

    n19htmare Notebook Evangelist

    Reputations:
    39
    Messages:
    440
    Likes Received:
    0
    Trophy Points:
    30
    Any reason why the T7500 is stuck at 1.6ghz?

    I thought that the chip clocks itself down when on low load but goes up once it sees load. I'm running Orthos to put 100% load on the machine, but the Clock won't go past 1.6ghz as reported by CPU-Z

    The multiplier should switch to 11X once it sees full load but it seems to be stuck at 8x.
    I would also like to add that it's ALWAYS stuck at 200x8 (1.6ghz), Idle, full load, no matter what, its always stuck at 1.6ghz..... I have no idea why.

    Any ideas, this is on 2500t notebook with VISTA premium.


    GRRR FIXED>.. VISTA was stuck on a whack power setting. Changed to maximum performance :). all is well, ill leave the thread up for others
     
    n19htmare, Sep 30, 2007
    #1
  2. Antalus

    Antalus Notebook Geek

    Reputations:
    4
    Messages:
    86
    Likes Received:
    0
    Trophy Points:
    15
    Check your battery setting.
     
    Antalus, Sep 30, 2007
    #2