The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    dv6-1216sa keyboard removal ?

    Discussion in 'HP' started by fender62, Apr 3, 2011.

  1. fender62

    fender62 Notebook Enthusiast

    Reputations:
    0
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    5
    i have to replace the keyboard on my dv6-1216sa out of warranty
    does anyone have instructions on how to remove it plz
     
    fender62, Apr 3, 2011
    #1
  2. KLF

    KLF NBR Super Modernator Super Moderator

    Reputations:
    2,844
    Messages:
    2,736
    Likes Received:
    896
    Trophy Points:
    131
    DV6 and DV7 are quite similar and it isn't much time since I last opened a DV7... I'm also too tired to search for Service Manual from HP website. It's late here :)

    So: First remove battery, under it there is probably few screws that hold the upper part of the top cover in place.

    Then remove the top cover part between keyboard and display, it should now come easily off since the screws are removed. Be careful not to yank it out, usually there is couple cables attached and you don't want to break their connectors.

    You can leave the top cover part connected with the cables, just move it enough so you can reach the keyboard screws (at least DV7 had screws) and open them. Then slide the keyboard away, unlock the keyboard cable.

    Assemble in reverse order.

    You should look for Service Manual from HP support website. DV6-1000 series is the correct one I think. They should all have same chassis.
     
    KLF, Apr 3, 2011
    #2