The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    dv9518TX Graphic problem

    Discussion in 'HP' started by eugenemcardle, Jul 12, 2010.

  1. eugenemcardle

    eugenemcardle Newbie

    Reputations:
    0
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    5
    Is it possible to replace the graphics chip on this laptop or will it need a complete motherboard replacement?
    I am unable to run any 3D applications and have had to disable the nvidia graphics in order to boot up. I have tried driver upgrades/downgrades etc but the issue is a hardware one.
     
  2. KLF

    KLF NBR Super Modernator Super Moderator

    Reputations:
    2,844
    Messages:
    2,736
    Likes Received:
    896
    Trophy Points:
    131
    The chip itself can't be replaced, either fix the motherboard with heat gun or replace whole motherboard.
     
  3. eugenemcardle

    eugenemcardle Newbie

    Reputations:
    0
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    5
    Thank you for your reply. I'm not clear on your comment "repair with heatgun". Are you refering to using a soldering iron to remove components, or an hair drier to perhaps clean the fan? I haven't dismantled the PC yet, but I assume there is a fan to cool the GPU??
     
  4. KLF

    KLF NBR Super Modernator Super Moderator

    Reputations:
    2,844
    Messages:
    2,736
    Likes Received:
    896
    Trophy Points:
    131
    Notebook Reviews - Laptop Reviews and Netbook News

    Whoah what an url monster. Those threads will tell the details better than I can, unless you want the instructions in finnish :)

    There is only one fan for CPU/GPU and since you need to dismantle whole laptop anyways, remember to take apart the fan assembly itself. The dust is inside and it cannot be cleaned properly unless taken apart.

    http://forum.notebookreview.com/gaming-software-graphics-cards/385857-baking-gpus-oven.html
    http://forum.notebookreview.com/ali...r-your-dead-graphics-card-your-alienware.html

    There is thousands posts around the internet on these issues today. Either heat the whole motherboard in the oven or get a heat gun to only heat the GPU.
     
  5. eugenemcardle

    eugenemcardle Newbie

    Reputations:
    0
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    5
    Once again, many thanks. Will check the links out and let you know how I got on.
     
  6. eugenemcardle

    eugenemcardle Newbie

    Reputations:
    0
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    5
    Those links are awesome! Makes a lot of sense and well worth a try. I remember having problems with "dry joints" on amateur radio equipment many years ago, and some old TV sets with vertical mounted circuit boards; heating with a hair dryer often worked with those, so the oven method sounds more than feasible. It's getting late over here know (Cairns, Australia) so I will try it at the weekend. Fingers crossed.
     
  7. KLF

    KLF NBR Super Modernator Super Moderator

    Reputations:
    2,844
    Messages:
    2,736
    Likes Received:
    896
    Trophy Points:
    131
    I did fix my dv9014 motherboard in the oven, as I don't own a heat gun myself.