The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    hp ZT1180

    Discussion in 'HP' started by okie1211, May 20, 2007.

  1. okie1211

    okie1211 Newbie

    Reputations:
    0
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    5
    Hi folks first time posting here, looking for some help... Please
    ok heres the deal. i recently had to replace the mother board on my laptop and the lcd inverter (guess its common for these to die) well anyways now when i try to start the laptop up i get a screen that just displays this message
    Press esc to change boot order
    press f2 to enter setup, f10 to start diagtools, f12 to boot from LAN

    well none of the buttons do anything unless i press them while its trying to boot and then i get this message
    Insyde Software MobilePro Bios Version 3.00.03
    copyright 1983 - 2001 Insyde Software Corp All Rights Reserved.
    =======================================================================================================================================
    Via Twister (VT8603) + VT8231 BIOS 3.00.03
    Build At 09:31:48 06/06/02
    HP Pavillion ZT1 BIOS Version IB.M107
    Twister VGA BIOS Version 15
    Copyright 1997-2001 Hewlett-Packard Co.
    serial Number : TW22605526
    Service ID : 00134
    UUID: 00546569C991D511AD9400023F3C6D30

    Base Memory 0000640 KB
    Extended Memory 0506880 KB
    Total Memory 0507904 KB
    Shared Memory 0016384 KB

    Press F2 to enter System Configuration Utility
    Auto Detecting IDE Devices
    Primary Master: Toshiba MK4018GAP
    Secondary Master: UJDA720 DVD/CDRW
    Insyde ACPI BIOS Version 3.00.04
    Copyright(c) 1998-2001 Insyde Software Corp All Rights Reserved.

    Entering System Configuration Utility, please wait...

    but it just sits there and never changes has any one here seen any thing like this before???? please help i am very tech savvy and am not against opening the laptop to change anything.
     
    okie1211, May 20, 2007
    #1