The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Pictures of disassembled GT755M5 Ultrabay Card

    Discussion in 'Lenovo' started by bcunje, Apr 26, 2014.

  1. bcunje

    bcunje Notebook Guru

    Reputations:
    24
    Messages:
    66
    Likes Received:
    13
    Trophy Points:
    16
    HERE IT IS! All the pictures you could ever need of the GT755M5 Ultrabay Video Card...

    GT755M5 Pictures - Imgur Album
    All 7MP resolution photos, so I'm not going to embed anything on this forum.

    It unfortunately does nothing useful in an unmodified August '13 1.07 bios y410p w/750m, just tells me something about vegetables:
    A picture of produce

    If somebody could please let me know of any additional steps such as VBIOS/BIOS reflashing or unlocking to remove whitelisting, please let me know. If not I'll just end up selling this card to someone with a 755m y410/510p.

    Notes:
    -Of course Lenovo lathered on the thermal compound, so I just re-pasted it with the proper amount of OCZ freeze.
    -One of the RAM chips does NOT come with thermal padding FROM THE FACTORY. There is not even a spot on the heatsink for a thermal pad, which I thought was very interesting. So that means 7/8 of the memory chips have a heat spreader and the other one just doesn't. You can see it on the top picture of the heat sink. Who knows...
     
    bcunje, Apr 26, 2014
    #1
  2. lilman227

    lilman227 Notebook Enthusiast

    Reputations:
    19
    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    5
    So this thread is a tad dated, but if you still have the GT755M5 card, I'd be more than happy to buy it off ya. I'm using a y410p with the GT7550, and I just got a compatible shell to put the card internals in
     
    lilman227, Sep 11, 2014
    #2
  3. thediatlovpass

    thediatlovpass Newbie

    Reputations:
    0
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    5
    Hey bcunje ... Do you remember or could see where this should be placed the middle bolt with spring (it different coil's density ) on ultrabay card ..

    [​IMG]

    it means to which hole should be put.... 1, 2 or 3 ?

    [​IMG]

    I didn't pay attention during disassembling :) ... Thanks in advance
     
    thediatlovpass, Oct 6, 2014
    #3
  4. bcunje

    bcunje Notebook Guru

    Reputations:
    24
    Messages:
    66
    Likes Received:
    13
    Trophy Points:
    16
    Sorry, I actually ended up converting this GT755M into a GT750M and am currently using it in my y410p as well :)
     
    bcunje, Oct 8, 2014
    #4