The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Report Using Accell UltraAV DP to DVI Dual-Link Adapter with W520

    Discussion in 'Lenovo' started by Mathelo, May 21, 2011.

  1. Mathelo

    Mathelo Notebook Guru

    Reputations:
    0
    Messages:
    57
    Likes Received:
    0
    Trophy Points:
    15
    I needed a DisplayPort to DVI Dual-Link adapter to get full resolution (2560x1600) on my NEC 3090WQXi with a W520 (Quadro 2000M). The NEC is a fabulous monitor but it does not have a DP input. Previously I was using a T400 and its docking station included the Dual-Link DVI so it wasn't an issue.

    I've read the various comments about the Accell adapter and it seemed like a hit or miss proposition but I needed to try something so I bought one.

    I received it yesterday and immediately plugged it in and configured the monitor in NVIDIA Control Panel. It has worked so far without a hickup and I do have the USB power coming from the W520. Many have reported needing to use a separate USB power supply.

    I'll report back here in a few days if I experience any issues but so far it is doing exactly what it is suppose to do.

    Louis
     
    Mathelo, May 21, 2011
    #1