The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    SL300 cloned onto OCZ Vertex?

    Discussion in 'Lenovo' started by Willdog2, Sep 8, 2009.

  1. Willdog2

    Willdog2 Notebook Guru

    Reputations:
    0
    Messages:
    58
    Likes Received:
    0
    Trophy Points:
    15
    Is there anyway I can do this? I just received the SSD today and would like to port everything over onto it before I remove the OS drive.

    I have the SSD hooked up via USB and though I could clone it across using Arconis 2009 but it doesn't recognize the USB drive!!!! We dont have a desktop so hooking both drives up at the same time via SATA is not an option.

    My system has no restore disks it is on a partition, any suggestions?

    thanks!
     
    Willdog2, Sep 8, 2009
    #1
  2. antskip

    antskip Notebook Deity

    Reputations:
    146
    Messages:
    795
    Likes Received:
    0
    Trophy Points:
    30
    Have you formatted the SSD? If not, do a "quick" format. Then check it is readable. Then you should be able to place the image on the SSD. Hope this is of help.
     
    antskip, Sep 8, 2009
    #2